2x stroke street tracker - project coming together slowly.

NoRiders

Member
Leftside footpeg has worked out well I reckon.....an amalgum of CBX & ZZR parts have come together well and should work well, with enough room to foot the brake pedal and gear changer.
I like the random loop that sits around the swingarm spindle (which needs shortening about 10cm)

20191128_210923.jpg
 

NoRiders

Member
Meanwhile, on'totherside the brake pedal will require some thinking about it seems....

20191129_174618.jpg


20191129_174611.jpg


Two options as I see it....either cut n shut the existing pedal, it'll need straightening along the pivot line and curving to clear under the peg.
Or, find a suitable pedal off another bike with an 18mm spline......:)
 

NoRiders

Member
Further to my previous post I've had a think....and come up with an alternative brake pedal solution using the ZZR pedal pivoting on the footrest spindle, it clears the enginecase and zorst as well as deliveing enough travel from the built in drop link, to operate a rear brake m/c.
Just need to fettle spacers/bushes/links etc.

20191129_214242.jpg


20191129_211917.jpg
 

NoRiders

Member
A tidy solution!

Crazy
Thank you stroker.....I like that the few 'spare' pieces I have acquired come into good use....not quite what I intended but it'll work all the same I'm hoping. I'll see about spacing the leftside peg out a touch, maybe 15mm to balance and possibly align with the gearchanger better too.
 

NoRiders

Member
Made a bit of time today, trying to sort my shit out as the garage is a proper mess.

Also, stripped, cleaned n painted the inner surround that was corroded.....came out nice :)

I didn't attempt to touch the face as it's a weathered bloom finish and I didn't want to disturb and spoil it.

It's not perfect by any means, but clean enough.

I'll fashion a cover/shroud out of some thin flexi stainless I have purloined.......might even form it around the headlight bowl for a semi integrated smooth look.....hmmm?

20191130_163623.jpg
 

NoRiders

Member
My free of charge headlight pod arrived today....mocked it up to see how it'll look....OK I reckon. Going to paint it white to match the bodywork/tank/seat unit etc.

Just need a headlight unit/bezel for it now.







Can you tell which bike was the donor?
 
Top Bottom