Anybody have these Levers/MC Combo?

YogiBear

Over 1,000 Posts
I'm looking at these: http://www.ebay.com/itm/Brake-Clutch-Master-Cylinder-Set-Kit-Reservoir-Lever-Universal-7-8-Handlebar-B-/160610847080?pt=Motorcycles_Parts_Accessories&hash=item2565270968&vxp=mtr#ht_6174wt_177
Does anybody have them?
 
Yogi, they do have the switch on the brake side. If you scroll down the ad to the row of pics, right side-second one down, shows the switch.
 
They look ok, but neither ad mentions master cyl bore size... How do you know if they'll work with your brake system?
 
That's my main concern as well. My buddy is going to use them on a single disc CX500. I'm waiting to see his results before I buy a set.
 
Redbird said:
Yogi, they do have the switch on the brake side. If you scroll down the ad to the row of pics, right side-second one down, shows the switch.


doh, totally missed that. thanks
 
no mentnion of bore size do not buy unless you find out it has 5/8 or i think 16mm (may be 19) for a single piston large bore caliper
 
Everything pictured is what my buddy got when he ordered his. It's a Chinese company and their wording of the ad is off/odd.

They also sell just the levers... http://stores.ebay.com/FactoryKiss/Motorcycle-Clutch-Levers-/_i.html?_fsub=2420839016&_sid=951452036&_trksid=p4634.c0.m322
for $35, but are listed for the specific bike, not "generic" like the first link I posted.
 
Well, they're inexpensive. "Value" remains to be seen :p :D

I can vouch for their levers though. I had a set on the Hayabusa, and the fit/finish was very good (very near the quality of Pazzo's). They bolted right on and operated flawlessly. For the price they were well worth it.
 
Agreed - I got a set of no name Chinese shorty levers for my fighter (to replace my Pazzos which I ended up selling) and the quality was right up there. In fact, you couldn't tell them apart when they were sitting side by side on the workbench (except for the missing Pazzo logo).

The Chinese are pretty good at copying simple stuff ;)
 
I have been emailing with the seller and I got some more info. It seem the Master cylinder has a 12mm piston. This is perfect for single disc applications but is all wrong for twin discs.

I am close to pulling the trigger on this as it looks good and is appropriate for my setup. I will make sure to post my results. It will be a while as I am collecting parts now and not ready for final assembly until later this year.

These are the ones I am looking at: http://www.ebay.com/itm/150625105694?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649#ht_1756wt_1163
 
Let me tell you, adrian I purchased those in blue and love them. They look killer on the bike and perform excellently. I think you will be very happy with them
 
YogiBear said:
Let me tell you, adrian I purchased those in blue and love them. They look killer on the bike and perform excellently. I think you will be very happy with them

Excellent! I just put my existing MC and Clutch lever on ebay along with a few other things. As soon as they sell i'll get a set.

Do you have some pics of them installed?
 
adrianm1972 said:
Excellent! I just put my existing MC and Clutch lever on ebay along with a few other things. As soon as they sell i'll get a set.

Do you have some pics of them installed?


sure I'll get one for ya


Edit:
nxmcrr.jpg
 
Back
Top Bottom