Brat / Bob

Moving right along . I got the forks rebuilt and installed along with the front wheel
 

Attachments

  • IMG_20191109_163542_438.jpg
    IMG_20191109_163542_438.jpg
    101.5 KB · Views: 300
Stripped the original paint off and got the bodywork done on the tank
 

Attachments

  • IMG_20191126_071420626.jpg
    IMG_20191126_071420626.jpg
    3.2 MB · Views: 283
  • IMG_20191126_102154346.jpg
    IMG_20191126_102154346.jpg
    3 MB · Views: 292
Took. A break last night to.work on a different bike . I found this in the trash ,brought it home and aired up the tires and check it over to make sure it is safe . I'll then give it to some kid who doesn't have one .
 

Attachments

  • IMG_20191126_195405185.jpg
    IMG_20191126_195405185.jpg
    3.8 MB · Views: 288
Last night I got to escape from the house down to the garage . The next step besides paint is to rip into the eng. So I had to make a stand . A stick of 1/2 tubing , a grinder , a welder and about an hour later this is what I came up with
 

Attachments

  • IMG_20191229_184905857.jpg
    IMG_20191229_184905857.jpg
    3.7 MB · Views: 275
Ok it's been a couple days since my last post . I got a little done and hopefully I'm in the home stretch .
 

Attachments

  • IMG_20210619_131705808.jpg
    IMG_20210619_131705808.jpg
    2.6 MB · Views: 178
  • IMG_20210619_131716685.jpg
    IMG_20210619_131716685.jpg
    3 MB · Views: 177
  • IMG_20210704_131401781.jpg
    IMG_20210704_131401781.jpg
    4 MB · Views: 185
Glad I'm not the only one still working on a project from a decade ago lol looking great!
 
I like it and it has been 10 years since you started.........!!!!!!!

And 3 years ago, since I replied.......!!!!
 
A little more progress today .
 

Attachments

  • IMG_20210815_173953733.jpg
    IMG_20210815_173953733.jpg
    3.9 MB · Views: 173
  • IMG_20210815_174028012.jpg
    IMG_20210815_174028012.jpg
    3.7 MB · Views: 166
  • IMG_20210815_174038305.jpg
    IMG_20210815_174038305.jpg
    4 MB · Views: 158
Now gonna make my first ever attempt to lace a wheel .
 

Attachments

  • IMG_20210815_174405497.jpg
    IMG_20210815_174405497.jpg
    3.3 MB · Views: 176
Got the rear wheel laced the other day . Now to get the front done and get them balanced
 

Attachments

  • IMG_20210826_162254128.jpg
    IMG_20210826_162254128.jpg
    3.3 MB · Views: 165
So still been picking at it a little at a time . Got the front wheel straight now have to move on to the rear . Just got the engine back into the frame now to start putting the wiring harness back on it .

It's coming together slowly but still trying to get it done . Now a question . Would you wrap the header pipe or find decent chrome ones ?
 

Attachments

  • IMG_20220113_190240514.jpg
    IMG_20220113_190240514.jpg
    2.1 MB · Views: 129
Back
Top Bottom