BWahahaha seriously?

[Fix]

I'm looking for 12 m8 1.25 30mm hex head bolts for the front rotors on the bike I'm building. I found this auction on ebay.
Note: These are SINGLE bolts. Check the shipping per bolt.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=120569417553&crlp=1_263602_263622&ff4=263602_263622&viewitem=&guid=95125bf411f0a09c13631483ffee5609&rvr_id=131305948419&ua=WVF%3F&itemid=120569417553

 

[teazer]

You can get them from almost any good hardware store for a couple of dollars and zero shipping cost

 

[crazypj]

I was thinking that, those look pretty nasty for a dollar each.
Standard blck finish Allen are only $13.00 a 100.
Look in Yellow Paged for Fastener suppliers local
I would look for stainless dome Allen head (or even stock Allen) if I wasn't using shouldered brake bolts on 665 (and XS)
Fastener express has them 10 for $12.08
http://www.fastener-express.com/m8-x-1-25-x-30mm-socket-head-cap-screw-stainless-steel-qty-10.aspx

 

[Ethanol]

I see your hand and raise you! http://cgi.ebay.com/ebaymotors/78-YAMAHA-XS750-XS-750-SPECIAL-GAS-TANK-EMBLEM-SCREWS-3-/400062162807?pt=Motorcycles_Parts_Accessories&hash=item5d25902777


4 screws for mounting emblems on a gas tank. Not the emblems themselves, the screws.

$19.99 + $4.99 shipping. No shit.

 

[crazypj]

AND, they are used
I guess you know they fit then?

 

[Aetsh]

I see your hand and raise you! http://cgi.ebay.com/ebaymotors/78-YAMAHA-XS750-XS-750-SPECIAL-GAS-TANK-EMBLEM-SCREWS-3-/400062162807?pt=Motorcycles_Parts_Accessories&hash=item5d25902777


4 screws for mounting emblems on a gas tank. Not the emblems themselves, the screws.

$19.99 + $4.99 shipping. No shit.

OMG hahaha

 

[Bobdot]

McMaster Carr anyone?????

http://www.mcmaster.com/#screws/=8nhde8

 

[Skyeye]

I'll second McMaster Carr for fasteners. I usually get my stuff overnight from them ( warehouse is located in NJ). The web site might take some getting used to but the prices are good and the service is exceptional.

You might also consider a trip to your local Fastenal store. They may or may not have a good stock of metric on hand, varies by store. I signed up for an account so I can order parts, no cash up front, usually a two day delivery and they bill monthly.

Scott

 

[Rocan]

no local fastener store thats worth going to.

mcmaster is the Bomb Diddly. love their selection.

 

[crazypj]

That's pretty cool, McMaster gives grade.
The stainless Allen button head are 10.9 which is higher than most stock brake bolts (usually 9.0 or 10)
I just bookmarked it