Cafe steel Gas/ fuel tank+ cap and petcock. New

[kickracingmotorcycles]

This is an aftermarket 2.4L fuel tank with a nice look and has knee indents. Comes with the cap and petcock.

The quality is very good. Great construction and welds. No issues. Good tank for the low price considring some thanks like this sell for several hundred. Brand new never used. Price is $55 obo! Shipping will cost a flat extra $10, but actual cost for me will be around $30

Below is a picture set on my cb360. Some modification/ weld is required to mount it.

 

[Out]

Where are you located?

 

[kickracingmotorcycles]

Utah usa

 

[Redbird]

You typo'd the capacity. It's 2.4 gallon - 9 liter.
The pics show it correctly though.

I first read it and thought "WTH?!, How far can you get on a half gallon??"

 

[sbaugz]

I would agree that these are "very good" tanks. The metal is fairly thin, but overall decent quality.

Mine required modification to get it to fit on my GT185. The tunnel is very large and would probably fit most frames. The knee dents look really nice. My only major complaint, the overall design is somewhat poor in terms of petcock placement. The center hump is fairly high so about 1/3 of the gasoline inside the tank will stay on the opposite side of the petcock, limiting your range. I ended up welding in two 1/8" NPT bungs under the tank for a crossover tube.

Here is mine mounted on the my frame. Not meaning to nitpick or affect your sale negatively- I just figured I would add 2 cents from another user of this tank.

Another major positive of using this tank- its virgin steel without any dents- so you can powder coat the tank for about $60-80 instead of dropping $600 on paint. Huge advantage for someone on a budget!