CB200 parts needed

interceptor

Coast to Coast
I am looking for a rear wheel spacer for a CB 200. It’s not the spacers on the outside of the wheels, it’s the one that goes inside between the bearings.
Also, I’m looking for a red, turning on/off switch located on the right side controls.
 
Check CMSNL.com You can open a diagram of the rear wheel. Honda lists the part as Collar, Rear Axle. The part number will be listed and the company may have it in stock. If not, do a search by part number on google it may be used on another model. Another option is to buy a rear hub or wheel and use it for parts or measure between the bearings to make one. On many models it is just a piece of tubing big enough to fit over the axle and prevent the bearings from binding when the axle is tightened.
 
Check CMSNL.com You can open a diagram of the rear wheel. Honda lists the part as Collar, Rear Axle. The part number will be listed and the company may have it in stock. If not, do a search by part number on google it may be used on another model. Another option is to buy a rear hub or wheel and use it for parts or measure between the bearings to make one. On many models it is just a piece of tubing big enough to fit over the axle and prevent the bearings from binding when the axle is tightened.
I never knew about CMSNL .. great resource, thank you for sharing that
 
I got this type of kick start for my 200 build. It ticks away more flush than the original.
I think it’s this eBay listing, but double check.



IMG_8208.JPG
IMG_8207.JPG



Sent from my iPhone using DO THE TON
 
I got this type of kick start for my 200 build. It ticks away more flush than the original.
I think it’s this eBay listing, but double check.



View attachment 241952View attachment 241953
IMG_8209.JPG


Sent from my iPhone using DO THE TON





Sent from my iPhone using DO THE TON
 
I used one of those on the CB160 cafe Racer, but had to heat and bend it to get it to clear the rear set footpegs. A stock CB160 kickstart lever might work for you, but either could be heated and bent to a slightly different shape.
 
Back
Top Bottom