CB350 Fiberglass Short Rear Underfender Now Available

[pacomotorstuff]

Hi everyone,
We posted an advert on Dec. 01 regarding the availability of our CB350 Fiberglass Road Racing Conversion Kits and made the comment that we were working on a shorty rear fender to protect the carbs and the motor from rear wheel crud.
Well, we've just started production (the first 2 are already sold) - and they'll be part of the Conversion Kits with a 15% discount off list like the rest of the kit components.
The fender was planned from the get-go as a racing component and I don't think it'll work with the stock battery and air filters location but... if you have a modified street ride and want some inexpensive protection for your motor, this would be a good solution. Fender mounting is up to the purchaser - make your own clips, tabs, brackets - whatever you think will work (and send us some photos of your mounted fender to share with others, please).
The fender is available at a list price of $38.00 Canadian + HST + shipping. We're running 2 to 3 weeks lead time on deliveries and shipping, so plan your purchases accordingly.
A few photos attached.
Email for more info.
Regards,
Pat Cowan,
Pacomotorstuff,
pacomotorstuff@cogeco.ca

 

[Habanero52]

NIce.

 

[silentsvn]

Do you have the measurements posted anywhere. Got a 350F that could use this


Sent from my iPhone using Tapatalk

 

[innovativems]

Do you have the measurements posted anywhere. Got a 350F that could use this


Sent from my iPhone using Tapatalk

Ha I got a400f was thinking the same thing


Sent from my iPhone using Tapatalk

 

[pacomotorstuff]

Oops me bad LOL!
Okay, some measurements:
inside width at the flanges is 9-3/4 inches, but if you trim the lips off, it will fit a slightly wider frame.
measured on the circumference, 12-1/2 inches,
measured on the chord - ie, inside straight line from end to end, almost 12 inches,
sagitta - ie, height of the arc, is 3 inches.
Mould was made for a left side chain drive.
Thanks for your interest.
Pat