CB350 Transmission/Stator set/Seat - CB360 Cylinder & Pistons - More

[ridesolo]

[size=14pt]Might be open to some kind of trade, too. What do you have?

Yeah I know pictures are best; we all know what this stuff looks like but I'll post some (or email them) if there's interest. As for price: I mostly want to see these 1) into the hands of someone who'll put them to good use, and 2) get them out of my shop. To that end, make me a reasonable offer (plus actual shipping costs) and they are yours. I ship USPS Flat Rate box whenever possible. The CB350 these came from was in excellent condition internally and all other parts from the bike have gone to very happy and satisfied buyers. Message me for info, pix, details, facts, figures, horoscope, weather forecast, or a general hard time.

1. '72 CB350 transmission set; both shafts and all gears, bearings, etc. Includes the clutch w/ basket, plates, etc and the push rod.

2. '72 CB350 kick starter shaft set; shaft, gears, spring, etc.

3. '72 CB350 stator set; rotor, coil, starter sprocket w/ dogs & springs.

4. '72 CB350 oil pump.

5. '72 CB350 Seat. Side hinge, very decent condition for its age. No rips or splits in the vinyl cover, some surface rust on the metal parts holding the grab strap. (No hinges or latch)

6. '75 CB/CL360 cylinder and pistons. Decent condition.

7. '75 CB/CL360 Starter drive sprocket & clutch dogs.

8. '75 CL360 Seat. Decent for its age; a couple of minor splits in the side but the top is intact.

9. '75 CB/CL360 Oil Pickup. (Not a CJ pickup, that's now installed in the engine, this is the one I replaced, nothing wrong w/ it.) [/size]

 

[ridesolo]

Bump

 

[ridesolo]

To top

 

[thrillseeker]

You have a starter clutch for the 360?


Sent from my iPhone using Tapatalk

 

[ridesolo]

You have a starter clutch for the 360?

I still have them. I'll go out to the shop and take a pix or two to send and make sure that's what you need. How's that sound? Cory

 

[ridesolo]

You have a starter clutch for the 360?

Here are a couple pix of what I have. Message me if you are interested.

As a side note; I thought there was almost nothing interchangeable between the 350s and the 360s, but I discovered the 350 clutch dog and starter sprocket assemblies seem to be identical. Huh, who'd a thought it...

 

[thrillseeker]

just the sprocket and internal parts of the clutch? do you have the clutch body? thats the part I'm looking for.

 

[ridesolo]

just the sprocket and internal parts of the clutch? do you have the clutch body? thats the part I'm looking for.

No, sorry. That is the back side of the rotor, that had to remain so the stator works. If someone can confirm if one from a 350 would work I can help you out.

 

[thrillseeker]

I’m pretty sure you can remove that from the rotor. I removed it from my 360 when it was kick only. Also, 350 and 360 starter clutch have the same part numbers. But I already bought another clutch on eBay so I don’t need it anymore.


Sent from my iPhone using Tapatalk

 

[ridesolo]

I’m pretty sure you can remove that from the rotor. I removed it from my 360 when it was kick only. Also, 350 and 360 starter clutch have the same part numbers. But I already bought another clutch on eBay so I don’t need it anymore.

Yeah, I know you can. When I had the rotor off the crank shaft and took off the sprocket and clutch dogs I made some attempts to turn the screws out but didn't want to risk marring it up in the vice so I just left 'em in there and put it back together w/o the dogs and sprocket.