Hey guys. I picked up a prebuilt 75 CB360T a while ago with the hopes of using it as a daily but it started having issues almost as soon as it arrived. I’m hoping to get some opinions on what might be causing these problems since I’m at a complete loss.
It started off working without issue but after letting it sit for a few days it would no longer start via push starter. The headlight would fire up and the rear/brake lights worked fine as well but there doesn’t seem to be a line to the signals. On top of that the headlight dims and the horn just barely makes a noise when pressed.
I went over the wiring for hours looking for a disconnect but nothing stands out, and despite being a custom build the harness appears stock. I thought the battery might need to be replaced but it had just been put in before I picked the bike up so I’m stumped. Is anyone able to offer an opinion on what to try to get it up and going again?
It started off working without issue but after letting it sit for a few days it would no longer start via push starter. The headlight would fire up and the rear/brake lights worked fine as well but there doesn’t seem to be a line to the signals. On top of that the headlight dims and the horn just barely makes a noise when pressed.
I went over the wiring for hours looking for a disconnect but nothing stands out, and despite being a custom build the harness appears stock. I thought the battery might need to be replaced but it had just been put in before I picked the bike up so I’m stumped. Is anyone able to offer an opinion on what to try to get it up and going again?