TonUpSoldier
bad assed, super fast and fully gassed
Im sure this may have been covered at some point... Been a long while since ive been on here, but thought i would toss this out there in case it wasnt.
So everyone likes their quick turn throttles.. Some of ya spend big bucks on em, some people simply use some PVC to fatten up the stock sleeve, its all deadly.
I often use the throttle sleeve from a YZFR1 or R6. It will accomodate push/pull or simply pull, whichever your carbs are set up for, and the sleeve is like $12, comes with a nice new grip, and i order the matching stock grip. With some switch housing assemblies you may have to file the fins on the sleeve down a little bit to get it to move smoothly, and shoot a little silicone spray in there for good measure.
Just be careful though... The beauty of these is you dont have to "re-grip" to go WFO, but until you get used to it, depending on the bike, she might throw you off the back
So everyone likes their quick turn throttles.. Some of ya spend big bucks on em, some people simply use some PVC to fatten up the stock sleeve, its all deadly.
I often use the throttle sleeve from a YZFR1 or R6. It will accomodate push/pull or simply pull, whichever your carbs are set up for, and the sleeve is like $12, comes with a nice new grip, and i order the matching stock grip. With some switch housing assemblies you may have to file the fins on the sleeve down a little bit to get it to move smoothly, and shoot a little silicone spray in there for good measure.
Just be careful though... The beauty of these is you dont have to "re-grip" to go WFO, but until you get used to it, depending on the bike, she might throw you off the back
