China made MC and clutch levers

[C1ph3r]

So I found these on eBay. After a few days wait and some very broken english responses, they say that the MC piston is "around" 14mm. Anyone ever buy from these guys.

http://www.ebay.com/itm/170979741964?ss ... 1438.l2649

 

[johngofast]

haha, the sellers name is powermotor_usa, out of Hong Kong.

They look nice, whats your concern with the MC and what bike are you putting this on?

 

[MotoMadness]

The chinese brake and clutch levers are fine. Stay away from the masters if ya value your life

 

[C1ph3r]

Yeah the name vs location made me laugh too. It is goin on a 75 cb360t. Been looking for at a modern master cylinder lever combo for some time. I was thinking just going with a nissin from dime city but didn't know what to pair it to for the clutch lever. I really want CRG shorty levers but couldn't ever find a combo that would work. S I thought these could be a good compromise.

 

[johngofast]

The chinese brake and clutch levers are fine. Stay away from the masters if ya value your life

Why is that?

 

[C1ph3r]

They look nice, whats your concern with the MC and what bike are you putting this on?

Sorry I didn't answer your question. Well the stock cb360 master cylinder is 14mm. My concern about it was their first responec to my question about the size of the MC bore was its located in the front. then the second responce was its around 14mm. I really don't want to spend that kind of cash to get it here and it be way off. It's a crap shoot. I'd rather have one that i know is the correct size. I like the idea of a remote reservoir so I can make adjustments to be sure it will fit. So finding both brake and clutch levers and MC from a modern common bike would make finding parts later much easier.