Cognito Moto Design GSX-R fork conversions

fly2devin

CognitoMoto.com
DTT BOTM WINNER
GSX-R conversion Hubs are now back in stock! 36 and 40 hole versions available.




www.CognitoMoto.com
 

fly2devin

CognitoMoto.com
DTT BOTM WINNER
john z said:
will this set up work on a 1981 cb 650?
The hub and everything will work fine. I'm not sure of the neck length on the cb650 but I'm pretty sure it's the same as the 750. I'm waiting to hear back from a fellow that purchased the stem to fit a cb650. If you want to take some measurements I can check for you.



www.CognitoMoto.com
 

john z

New Member
Tree and forks are still on bike, but i got 7.50 for neck, 2.38 on top bearing cap.
Thanks for the help
 

DreadRock

Bang Cut Grind ..Dam Did I Need That Part ?
DTT BOTM WINNER
Really can't use anything ( Yamaha guy ) but Dam you guys do nice work ! Jumped on your site and if you ever do Yam parts let us know please ! Again nice work ..
 

fly2devin

CognitoMoto.com
DTT BOTM WINNER
DreadRock said:
Really can't use anything ( Yamaha guy ) but Dam you guys do nice work ! Jumped on your site and if you ever do Yam parts let us know please ! Again nice work ..
I want to get some XS650 parts going


www.CognitoMoto.com
 

fly2devin

CognitoMoto.com
DTT BOTM WINNER
john z said:
Tree and forks are still on bike, but i got 7.50 for neck, 2.38 on top bearing cap.
Thanks for the help
7.5" is the same as the CB750. Should work perfectly. If for some reason it doesn't we always accept returns.


www.CognitoMoto.com
 

ekb20b

New Member
SpeedBump said:
GSX-R conversion Hubs are now back in stock! 36 and 40 hole versions available.




www.CognitoMoto.com
would you happen to know whats the biggest size tire a cb350 can run on the stock wheels? the reason i'm asking is i want the front wide enough to make the GSXR front end not look funny with a skinny front tire.
 

fly2devin

CognitoMoto.com
DTT BOTM WINNER
ekb20b said:
would you happen to know whats the biggest size tire a cb350 can run on the stock wheels? the reason i'm asking is i want the front wide enough to make the GSXR front end not look funny with a skinny front tire.
Not sure since I've never done that setup. However, I don't think it would look funny.


www.CognitoMoto.com
 

fly2devin

CognitoMoto.com
DTT BOTM WINNER
Ryanlowry said:
Pardon the super bad cell phone photo but I got my front end mounted up today! SPRING HERE I COME!
Looking good man. Keep it coming.


www.CognitoMoto.com
 

Tcb750

New Member
Hey guys. Was wondering if a 2009 gsxr750 front end would fit on a 77 CB750.
I’m sure all balls will have to supply me with bearings by wondering if anyone has the knowledge of the fitability of this custom.
Thanks in advance!
 
Tcb750 said:
Hey guys. Was wondering if a 2009 gsxr750 front end would fit on a 77 CB750.
I’m sure all balls will have to supply me with bearings by wondering if anyone has the knowledge of the fitability of this custom.
Thanks in advance!
Such a late reply but I am almost certain that mine is a 2009 750 fork on my 78 cb750
 

kar1zma

New Member
very interesting mod

but i am looking to make a similar conversion for a RD350
do u have any products for the same
 

DTT Bike Of The Month Gallery

DTT Light or Dark

www.cognitomoto.com
https://www.townmoto.com
www.speedmotoco.com
www.jadusmotorcycleparts.com
www.lostapostle.ca/
www.sparckmoto.com
Top Bottom