drilled rotors and speed holes on parts please read pg.1 for price and info

Re: drilled rotors and speed holes on parts 10%off

also i must inform you that effective today, unfortunately, i have to raise my price...
it sucks, but prices have gone up a bit on the stuff i use for the process, and you all know how expensive good bits are.
im still going to be at a low price though, compared to shops charging 80 to over 100$ just for 3-2-3 patters (which is rediculous).

new prices below.

standard pattern: $35 + shipping
4-3-4 patterns: $40+shipping
drilled drums: $40+shipping
misc. parts: contact me.

included with the price increase: drilling, chamfering, cleaning, degreasing, and removing some of the glaze. and il top it off with a light cross hatch so that the rotors look nice.


*price change does not affect those rotors already in my possesion for drilling.
 
Re: drilled rotors and speed holes on parts-cheap. 25$ new thread

Still waiting for your shipping address? In the above pic, the rotor on the left is a rear like I need done. How many holes total are there, and the hole size is? What roughly is the turn aroung time from Illinois 60435?
 
Re: drilled rotors and speed holes on parts 10%off

a rough estimate would be around 64 give or take, 1/4" holes. laid out to be offset and overlap in the in between spaces..

turn around time is about a week... though right now i have a build which the deadline got pushed up to " need done yesterday" so im trying to get someone to help with the rotor drilling.. i will know by the end of today and will let you know..
 
Re: drilled rotors and speed holes on parts-cheap. 25$ new thread

hurley209...What's everyone doing for shipping? flat rate box?
 
Re: drilled rotors and speed holes on parts 10%off

yep. flat rate medium box... about 14$
 
Re: drilled rotors and speed holes on parts-cheap. update on bottom of page 3

where in CA are you?

Thinking of doing this if i can drop mine off
 
Re: drilled rotors and speed holes on parts-cheap. update on bottom of page 3

Josh,

Thanks got the rotor back yesterday, looks excellent. Went with the 4-3-4 swirl pattern and very happy with the quality of work and the cost...great value and good turn around. Next in line is the CB750F with triple disc, when I get it out of storage I'll give you a shout. Thanks again.

Respect
CD

Forgot the photo
Chelsea-20130312-00517_zps9d673611.jpg
 
Re: drilled rotors and speed holes on parts

alright guys i can do a turn around of about a week back in the mail over the next few days. and 10% off until April 5th.
when you pm me just dont forget to mention the 10% off deal.
 
Re: drilled rotors and speed holes on parts update on bottom of page 3, 10%off pg.4

Just saying hey bro! what up! how U been?
 
Re: drilled rotors and speed holes on parts 10%off

Get your rotors drilled! 10% off again until the end of the month! pm me with info.

and louie, i pm'd you.
 
Re: drilled rotors and speed holes on parts 10%off

bump

and once more for reference, all patterns are laid out and sized correctly for proper brake pad wear and even venting, look great and 100% functional. patterns are all computer generated.
 
Re: drilled rotors and speed holes on parts 10% off

cleaned up and updated this whole thread from the first post to the end.
 
Re: drilled rotors and speed holes on parts 10% off

Got my rotors today, they look great and quick turnaround.

Thanks
 

Attachments

  • IMG_5059.JPG
    IMG_5059.JPG
    991.4 KB · Views: 217
Re: drilled rotors and speed holes on parts 10% off

got my rotors put on today really happy, hurley does great work and quick turn around time
 

Attachments

  • blackwheels.jpg
    blackwheels.jpg
    616.2 KB · Views: 203
Re: drilled rotors and speed holes on parts 10% off

this week only! 30$ swirl patterns! contact me for shipping info
 
You must log in or register to reply here.

DTT Light or Dark

  • DTT Light
    • www.jadusmotorcycleparts.com
    www.lostapostle.ca/
    www.sparckmoto.com

    Spread the Love

    Back
    Top Bottom