joeyputt
The green flag sets me free
This is Joe of DWMS Racing south of Dothan Al., I have a couple of bro's over here on the ton so I thought I would come hang! This is my personal cb550 bike going togethor! I started with the heart of the bike...the engine! All work,engraving, polishing, painting and fabricating was done in house personally by me! Here are a few pic's of what I have done so far!
Edited 10/17/11 - For those of you who are new to reading this thread these first photos show the engine as I was building it in a stock configuration before I decided to reverse port it, the reverse port build photos are shown later.
...polished the shelf on top of the cooling fins and the rocker box end cap...
...sanded flat and polished the cylinder heads cooling fins edges...
...engraved and copper color inlaid the sprocket cover...
...and the clutch cover as well...
...top, this is before I polished the shelf on the fins...
I am currently sanding the covers for polish...new pic's soon!
Edited 10/17/11 - For those of you who are new to reading this thread these first photos show the engine as I was building it in a stock configuration before I decided to reverse port it, the reverse port build photos are shown later.
...polished the shelf on top of the cooling fins and the rocker box end cap...
...sanded flat and polished the cylinder heads cooling fins edges...
...engraved and copper color inlaid the sprocket cover...
...and the clutch cover as well...
...top, this is before I polished the shelf on the fins...
I am currently sanding the covers for polish...new pic's soon!