Help Finding Suitable Part

[HerrDeacon]

I have something in mind but no clue if it exists or not, so just throwing it out there to see if someone has come across anything close or knows what terms to use in search.

I'm looking for a small 90 degree thingy (technical term ) to use to mount my windscreen. It would have to be internally threaded so that I could put a bolt in on each end (one to bolt to fairing and one through windscreen). The closest image I could find is something like below but threaded to accept bolts on both ends and fairly small. I'm having problems searching for anything since I don't know what terms to use, any idea? I've come across glass standoffs that look like what I'm searching for but nothing 90 degrees or small enough.

 

[xb33bsa]

http://www.proformancepros.com/cgi-bin/commerce.cgi?preadd=action&key=CHS-C73-380

 

[HerrDeacon]

No one? May try to get up to the hardware store today to see if they have anything there for hanging mirrors or something, or something I can modify to suit my needs. If not, will have to try and make something.

 

[TijmenK]

You could use this with two long nuts (connecting nuts is the technical term I think)

http://www.amazonsupply.com/weatherhead-carbon-flareless-series-fitting/dp/B00BKFMXG8

 

[SrgtBear]

Get a tap & die set and make your own threads.

 

[HerrDeacon]

Thanks guys, gives me some ideas. Was hoping to find something ready made since they will be visible but fabbing something maybe the only way.