Chuck78
Been Around the Block
I have an old 1970's Italian aftermarket Scarab-Mozzi-Motor hub for sale, NOS never even laced into a rim. I got this as it looks 98% identical to a Rickman dual disc front hub, but I have since found a complete Rickman dual disc front wheel.
1970's bearing grease is stiff as glue at this point from never being used, will need bearings re-greased.
If anyone is interested, I'll snap some photos for you. 36 spoke. Styled just like Rickman hubs. Buchanan's can make you spokes for these no problem. Just like Rickman spokes, they are much closer to a straight pull design than the conventional 90° spoke bend, i.e. stronger and less spoke breakage at the head.
Spoke flanges are slightly narrower than Rickman so you can have slightly more clearance for opposed piston calipers if desired
Email or PM if interested. Check back if you don't hear from me, perhaps it went to my junk mail folder.
1970's bearing grease is stiff as glue at this point from never being used, will need bearings re-greased.
If anyone is interested, I'll snap some photos for you. 36 spoke. Styled just like Rickman hubs. Buchanan's can make you spokes for these no problem. Just like Rickman spokes, they are much closer to a straight pull design than the conventional 90° spoke bend, i.e. stronger and less spoke breakage at the head.
Spoke flanges are slightly narrower than Rickman so you can have slightly more clearance for opposed piston calipers if desired
Email or PM if interested. Check back if you don't hear from me, perhaps it went to my junk mail folder.
