LED Replacement Bulbs for Gauges

[Sonreir]

Now available from Sparck Moto!

Five white light bulbs for only five dollar. Free shipping within the USA, $10 to other destinations.

These BA9S bulbs are a direct replacement for most (if not all) the bulbs in your gauges and dashboard clusters. Suitable for back lights, high beam indicators, oil pressure warning lights, and other applications. Along with a diode setup, these can even be used if your bike has a single turn signal indicator light (as opposed to one for left and one for right). Contact us if you need a diode setup.

Available for purchase from our website at http://www.sparckmoto.com/Products

 

[78kz]

Just ordered some.
8)

 

[Tune-A-Fish]

Any ideas on where to get the little color button lenses, I want to see if I can make up my own light panel.

 

[Sonreir]

Sorry, I don't, but I know you can make your own using clear epoxy and resin pigment.

 

[Tune-A-Fish]

Sorry, I don't, but I know you can make your own using clear epoxy and resin pigment.

I think I may have an idea: just thread the insert end and counter sink, then cut and polish it flush

[EDIT] Custom tail lights anyone??

 

[thehands]

sparkmoto is not allowing me to register?
this is what i go to every time i register.
Could not load file or assembly 'System.Web.Mvc, Version=4.0.0.1, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.

 

[Sonreir]

sparkmoto is not allowing me to register?
this is what i go to every time i register.
Could not load file or assembly 'System.Web.Mvc, Version=4.0.0.1, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.

The issue has been resolved. Thanks for bringing it to our attention.

 

[thehands]

sorry again but do i need to add anything to my electrical system? or can i just plug them in to my bike? (old 1972 cl350 stock)

 

[Sonreir]

They should be a straight swap for everything except your turn signal bulb. You'll need a diode setup to run it with your turn signal indicator (I can provide that for $10, free shipping).

 

[2_DONE_THE_TON]

I love the idea ;-)