Mikuni Group Buy - August 2014

[Sonreir]

Not technically needed, but I'd buy one if I were running VMs.

 

[Getho]

I'll get them then, thanks Sonreir

 

[legendary_rider]

Do they have TM30 flatslides? My understanding is that it goes TM28 then TM32 for the flatslides.

On a related note, I am running both the TM28 flatslides and the VM30 roundslides on two CB350's right now.

My butt can confirm, the bike with the TM28's is a lot more responsive (feels almost too snappy), and overall just performs better.

I'd like my butt to second that. Hey Matt, what would the TM28's go for? Does anyone else have any experience with TM28's and agree?

 

[Sonreir]

For whatever reason, there are no TM28s. There are VM28 round slide and VM28 flat slide... lol

 

[legendary_rider]

Oh lord, just set me up with some regular VM30's then. lol. + jetting please + shipping to Ontario Canada

 

[Sonreir]

Sorry... forgot to include payment info...

If you're in on the deal, payment can be sent via paypal to sales@sparckmoto.com

For those ordering jets as well as carbs, I'll need to know the sizes you want.

 

[socalmike_cb72]

For whatever reason, there are no TM28s. There are VM28 round slide and VM28 flat slide... lol

I believe that Mikuni calls them by both.

"VM28 flatslide" is just the same as a "TM28"

 

[Sonreir]

Possible, but my supplier does not list a TM28 in their catalog.

 

[TurdFurguson]

Dont worry guys, I hit the min order for all of us. We are good to go

 

[legendary_rider]

Whats your paypal addy Matt?

 

[Sonreir]

sales@sparckmoto.com

Also, payment received from JSJamboree. We have enough sales to hit the group buy minimum, so we're on for the discount.

 

[legendary_rider]

Payment sent bud. Also for 176 and 55 jetting + Canada shipping. Let me know if I short changed you at all. I was fighting off a polar bear while doing math.

 

[Sonreir]

55 main jet is beyond small. I'd recommend a lot closer to 160 or maybe even 180.

 

[cxman]

55 is a large pilot not a main

 

[legendary_rider]

Yeah, basically whatever I need for slightly oversized jets on vm30 to account for my oversized pistons and mac exhaust. Can I poll the audience?

 

[Sonreir]

176 needles generally require larger mains than the 159s, too, FYI.

 

[cxman]

this should get it running well and broken in so you caan tweak from there

Main Jet:Large Hex 200
Emulsion tube/Needle jet: BLEED TYPE 176 series P-8
Slide: 2.5
Pilot jet:30
Needle: 5F3, lowest (richest) clip setting get next size up (richer) as well this may be what you need to change
Air Jet: 0.5
Air Screw: 2.0 turns out

for break in i might even put a 2.0 air jet in to make sure its rich

 

[TurdFurguson]

While everyone is throwing advice around, i'll throw my shit in the mix

RD350 - VM30s
Mild port job
Carrera Chambers
Pods
Boost tube
Modified reed cages

Suzuki GT750 - VM34s
Stock airbox
Aftermarket chambers

 

[Sonreir]

Last call! Need payment before tomorrow if you're in on the deal!

 

[Getho]

Can you confirm if you got my payment?

Thanks