My cb360t cafe project

[cb360tj]

Got the seat back from the carbon dip. I like it flat, but I'm going to clear it because the tank is glossy.


Sent from my iPhone using Tapatalk

 

[cb360tj]

The clear looks great.


Sent from my iPhone using Tapatalk

 

[cb360tj]

Sent from my iPhone using Tapatalk

 

[trek97]

sweet, amazing how closely that stuff can look like the real deal.

 

[cb360tj]

Yeah. It's pretty cool stuff. I did a gloss black under so it would look traditional, but if you did red or any other color it shows through and would look cool I'm sure.


Sent from my iPhone using Tapatalk

 

[cb360tj]

Sent from my iPhone using Tapatalk

 

[cb360tj]

Third time is the charm! Again I cleaned out the tank new fuel lines and charged the battery and started her up. 5 years later and it started up pretty easy. It seemed like the right cylinder was going in and out and i couldn’t get it to idle right, but i was really really happy to know it still started. With no breaks managed to ride it a block. So I’m motivated to get it finished! Somehow i lost one side of my front break caliper so I need to get that. The back breaks don’t seem to be engaging soon enough, which might be as simple as lengthing the all thread on the rearsets on that side.
I also need to get a new reg/rec on it. the battery might not be doing great.

 

[raptormeat]

for safety: to avoid gas vapor lock on highway, get some thermo-tec on underside of tank. also get 2 1/4" 3-way splitters and connect all carb gas lines together so pressures balance out between cabrs for gas delivery. many people report issues with petcock gas 'only coming out one nozzle' and connecting gas lines alleviates this from turning into a fuels tarvation issue on one cylinder at high rpms. new front/rear pads obviously. looking real good. get a 1/4 fairing on ebay from china there $25 and look perfect see my build.