No Purple Hearts, No Blue Ribbons
There is one window on the wall opposite of the door. It will have an ac unit in it shortly.
deviant said:Thanks. I need head pipes. I'll build the rest from there.
All I have are the stock collars. Got the motor in pieces with no exhaust and a broken stud. Just about to pick the head up from the machine shop where it was getting welded and a new stud machined.Tune-A-Fish said:Hardware too? I have a few sets of spigots n stuff..
If you have a TIG the Titanium ZX10R 04-5 fits the CB750 with two minor mods to the outside head tubes and just add to the spigots with a sleeve of Ti tube. I have bought 3 headers so far off ebay for under a hundy shipped.
deviant said:All I have are the stock collars. Got the motor in pieces with no exhaust and a broken stud. Just about to pick the head up from the machine shop where it was getting welded and a new stud machined.
Yep, my CB750 head. I get everything done at Evans Cycle Service. Tommy sent it out for welding though, then he machined it in shop.budlite282 said:Eric, are they welding an aluminum head?
If so, which machine shop.
I have a head that has a crack, and would like to see if it can be fixed, thanks man.
Maritime said:1984 Coleman camper. No more sleeping on the ground. Great shape, tows great, and even has original owners manual. We had to call it a night by 1 pm though so pick is in hotel parking lot
grandpaul said:I don't get it. Where do you put the bike(s)?