Post a pic of your latest purchase

Spent $60 and rescued this 72 from a slow death by rust in a field out in bum fuck nowhere.

1495532_10152860686827689_6179758538613390742_n.jpg
 
Tune-A-Fish said:
I have a perfect set of head pipes and a set of mufflers with holes if you want em.
Thanks. I need head pipes. I'll build the rest from there.
 
deviant said:
Thanks. I need head pipes. I'll build the rest from there.

Hardware too? I have a few sets of spigots n stuff..

If you have a TIG the Titanium ZX10R 04-5 fits the CB750 with two minor mods to the outside head tubes and just add to the spigots with a sleeve of Ti tube. I have bought 3 headers so far off ebay for under a hundy shipped.
 
Tune-A-Fish said:
Hardware too? I have a few sets of spigots n stuff..

If you have a TIG the Titanium ZX10R 04-5 fits the CB750 with two minor mods to the outside head tubes and just add to the spigots with a sleeve of Ti tube. I have bought 3 headers so far off ebay for under a hundy shipped.
All I have are the stock collars. Got the motor in pieces with no exhaust and a broken stud. Just about to pick the head up from the machine shop where it was getting welded and a new stud machined.
 
Nice new shop Justin.

This is a 1.5" lowering link for my wife's FZ6R. I have an adjustable kickstand to install too.
 

Attachments

  • fz6r_droplink.jpg
    fz6r_droplink.jpg
    55.7 KB · Views: 213
I found this OEM Honda wrench in a 360 I picked up. I love it, nice patina. Also, not a new purchase but a new picture of my newest build. Right side (not my favorite side :0 )

unnddddamed.jpg

unnsssssamed.jpg
 
deviant said:
All I have are the stock collars. Got the motor in pieces with no exhaust and a broken stud. Just about to pick the head up from the machine shop where it was getting welded and a new stud machined.

Eric, are they welding an aluminum head?

If so, which machine shop.

I have a head that has a crack, and would like to see if it can be fixed, thanks man.
 
budlite282 said:
Eric, are they welding an aluminum head?

If so, which machine shop.

I have a head that has a crack, and would like to see if it can be fixed, thanks man.
Yep, my CB750 head. I get everything done at Evans Cycle Service. Tommy sent it out for welding though, then he machined it in shop.
 
Maritime said:
1984 Coleman camper. No more sleeping on the ground. Great shape, tows great, and even has original owners manual. We had to call it a night by 1 pm though so pick is in hotel parking lot

I don't get it. Where do you put the bike(s)?
 
grandpaul said:
I don't get it. Where do you put the bike(s)?

On the roof! LOL. except I would be over my weight limit for sure. This is the family Vacation unit. I still have my small tent for motorcycle vacations. And we are hopefully teaching my wife to ride for family moto vacations this year too.
 
Finally got closed up on the house. Here are some pictures of the garage and the house. I don't quite have all of the motorcycles moved from Ohio... It is all a work in progress but the 35 acres that came with it is the real prize. So if anyone is in or around Eastern Washington County, PA just look me up.

Wood Stove is not currently in working order. So no worries about burning the building down in its current location...




The house needs some work but it will come in time.


 
Back
Top Bottom