SONICJK
Reminds me of...me No, I'm sure of it. I hate him
Finally got tired of messing with my household oven and decided to build a real one.
Basically building this:
https://www.powdercoatingforum.net/forum/ovens-and-booths/2877-my-propane-fired-oven-build
We decided for ease of the build to just build it 4x4x8 as that's the sheet size.
It turned out much bigger than anticipated haha but it should hold a frame. (or 10 lol)
Basically you just build walls with steel studs, face them with 26 ga galvanized (from a HVAC Supply store, 30 bucks a sheet) and put it all together with some Rockwool insulation.
This is where we sit at the moment. Need to build an angle iron frame for the door today and mount the door, cut the hole for the propane heater and wire it up. Hoping to finish it up today.
Basically building this:
https://www.powdercoatingforum.net/forum/ovens-and-booths/2877-my-propane-fired-oven-build
We decided for ease of the build to just build it 4x4x8 as that's the sheet size.
It turned out much bigger than anticipated haha but it should hold a frame. (or 10 lol)
Basically you just build walls with steel studs, face them with 26 ga galvanized (from a HVAC Supply store, 30 bucks a sheet) and put it all together with some Rockwool insulation.
This is where we sit at the moment. Need to build an angle iron frame for the door today and mount the door, cut the hole for the propane heater and wire it up. Hoping to finish it up today.