Project oil slinger!

[JRK5892]

i am almost possitve that this is the one we went with.... http://www.phatperformanceparts.com/ProductDetails.asp?ProductCode=EXILE%2DSPROCKET&CartID=

granted it looks much diff on the bike now, (the sprocket bolts backed out while doing about 60mph) so i had to re machine and polish a bunch of it, then replace teh bolts and lock them in place... no more drama back there

 

[Kanticoy]

Man, that's an awesome setup Joe. I'm assuming something like that just mounts up to a standard HD spool hum like you use on the front disk setup? Bad fuggin ass.

 

[JRK5892]

on the chop i had to machine a spacer to make it work and to get the chain out of the way of the 320 rear tire... but ya it is pretty bolt on, then tack the caliper tab to the frame, get the spacing righ and weld it all down