RD350 Powerdynamo wiring questions

[odie]

Hi all,
Long time follower but new here. I have a 1975 RD350 that’s been a project and then got put on the back burner for about 5 years. I’m finally getting back to it and I believe I just have the wiring left to get it going and then finish up the little details.

when installing the PowerDynamo/vape do I keep the stock rectifier if the pd Reg/Rec is also there?

also does the capacitor need to stay?

as far as the rest of the wiring I’m absolutely lost.

coil
Blue coil- relay 30
Red/white/red go to

stator two black- reg/rec

regulator
Red- stock rectifier
Brown- negative battery

relay
Brown- ground
Black-?

any thoughts. All help appreciated

Thank you

 

[pidjones]

Not any help, but encouraging plenty of posts! We like pictures! I would love to have an RD350 (even more an RD400). Such beautiful lines....

 

[Sonreir]

When installing the new PD regulator/rectifier, you'll want to remove the old one from the system.

Hookup of the ignition system can be found here: http://www.powerdynamo.biz/wiredias/72xr102.pdf