Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
I have been building a cafe racer out of a ST2, but I guess the project will be more like in Monster style so I thought I would start a thread showing whats happening. (well its got a S2R swingarm so I guess it qualifies as part monster anyhow )
I will start at the beginning and run through to where its at.
Hang in, its making good progress and I hope you like it so far.
To begin with - bought a crashed bike at the auctions.
Stripping
cut the rear of the frame off and added in some tube
the painter got a little over zealous and sandblasted the cases inside and out. No damage but I put on a coat of glyptol red engine enamel on the inside to stop porosity issues.
got the case back together and set about adding some more bling
today its up to here.
Worked out brackets for the lights, mounted the pump back in the tank and put the tanks on, checked out where the seat goes on, and set out to mount the tail light.
checked to see how to mount the speedo and how it will look, still have to make the bracket yet.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.