SYM Wolf 150 Build

New fender and cleaned up the electronics under the seat.
New-fender.jpg

Wiring-management.jpg
 
Parts ordered for fender delete. Just need to fab a bracket to mount the license plate.

Quick to scale mock-up. Indicators will be mounted to old fender tabs, two brake lights mounted to seat mounting brackets. Brake lights will stick out a little to match the seat lines. They’ll look similar to stock bullet style but more compact.
Fender-delete.jpg
 
Some really well done mods to make this bike unique and have a nice look to it. Good work man.
 
Thank you.
I picked this bike because a lot of generic honda parts fit it and reliability/upgrades that come with bikes from this century. Plus, it's my first project, I'm going to make mistakes. I'd rather break a new off brand bike than something that should be restored and retired to a collection.
 
Looking good so far! Those lights look a little close to the tire. Will they come into contact with it when the suspension is compressed? I had my rear tire eat my license plate once...
 
Looking good so far! Those lights look a little close to the tire. Will they come into contact with it when the suspension is compressed? I had my rear tire eat my license plate once...
They’re about half an inch lower than where the fender sat, so I’m going adjust the preload and pray haha
 
Tore apart the front end.
Rebuilding/shortening forks, cutting springs, adding bushings and heavier oil.
New headlight bracket.
Lowered gauges to sit flush.
Moved clip ons under top triple. Had to flip left/right and drill new holes in them to get position bolts to fit better.
front-end.jpg
 
Made a functional mock license plate mount out of some spare aluminum flat bar. Eventually it will be upgraded with a thicker steel version.
E314-FA8-B-F7-C1-44-B1-B055-3-A2-F4-A256-FE2.jpg

9-F9-AF605-7724-489-B-B29-E-9-D86-E4192-CCA.jpg
 
Nice job cleaning up the front end man. Bike looks nice and clean.. how does it ride?
 
Looks like my indicators are trapped in limbo at customs. It's nice out and I'm impatient, so I ordered another set from amazon that won't be shipped internationally.
 
Guess what was waiting at the post office and not customs... Good thing the KZ750 I’m working on needed indicators.

Indicators.jpg

Rear-lights.jpg
 
Those look great! Do the indicators from Amazon look the same? Where did the tail lights come from?
Tail lights($7 each)and indicators($4 pair) are from Aliexpress. The amazon indicators($14 pair) are about the size(50mm-ish) of the brake lights and the cone is a bit more pointed. They just wouldn’t look good on this small single.
 
Back
Top Bottom