WTB CB400F Supersport Rider Pegs, brake pedal, and shifter linkage

[OneWheelDrive]

This is everything I need to complete my project:

 

[Redbird]

Just went through this for my Bros '77 400F.
They're getting harder and harder to find. They pop up on eBay, but you have to be patient.
I can tell you that Parts-N-More carries the brake pedal, spanky new for $65.

Good Luck and Happy Hunting

 

[OneWheelDrive]

Thanks. To make things more difficult, it has to be '76 or earlier. Wish me luck!

 

[Redbird]

Yup, '75-'76 were the only years for them. '77 used a more forward peg.

I just noticed the bike at the bottom of your posts. Are you looking to put the 400F pegs on the 750?

 

[ronnie]

Do they have to be 400f pegs? I think have pegs for a 350f if that would work for you...

See more @ redemptiverepair.com

 

[OneWheelDrive]

Yes, have to be 400f including hardware and foot controls. Going to put them on a 550 as it's a direct swap.

 

[carnivorous chicken]

Just and FYI -- depending on the exhaust, you should verify if there are clearance issues. Similar to the 350F swap, that's where you might find a problem...

 

[Redbird]

Going to put them on a 550 as it's a direct swap.

Gotchya

They won't work on the 750. Mounts to the frame perfectly... clears absolutely nothing though. Ask me how I know

 

[OneWheelDrive]

Bumping

 

[OneWheelDrive]

bump