Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
Here is my latest of my 650 triples. I designed these a few months ago, and finally got some made. All billet CNC milled, 1 inch thick. 35mm only for now. cafe style, to run clip ons, and an OE style to run an aftermarket (or Stock) handle bar and riser. (stock risers will require spacers underneath clamp.)
Cafe price is $118 plus shipping,
OE piece is $135 plus shipping, and comes with poly bushing kit shown. STOCK BUSHINGS WILL NOT FIT
Both clamps come with tapped holes underneath, to accomodate stock gage cluster, or aftermarket units. Stsinless pinch bolts included for forks.
I have done it a few times, So its pretty easy for me. Its not that bad really. You leave your forks in place, ( ist best to use a jack or boards to help support the front end load) held by the lower clamp, and just remove your gagues, let them hang, and swap it all out. I dont have anything right now though, for the gap that will be left between the new clamp, and factory headlight ears. Take that into consideration before you buy.
ejc2g, I dont have plans in the works for a goldwing upper. But, in a while when my buddy gets his second mill, It will be easeir to do small production, and prototype parts like that. So, Its not out of question. I will certainly keep you in the loop on that. I am weeks behind on a norton upper and lower for a local guy right now, So im avoiding one off stuff for the time being.
Sweet, can you email me when you have the OEM available and i'll Paypal you the cash...or you can send an invoice to joshuarossi76@gmail.com. One last question. Should I buy any seals or washers or whatever when I swapout the top triples?
Nothing else should be needed. I am sourcing out chrome cap washers right now, to include with the OE clamps. So those will be included, but are not in photo.
Would be so great if you at some point made them for other bikes as well - I've been looking everywhere for something this for my KZ650 - nowhere to be found. Great job man
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
