Recent content by B400

I'm far from an expert but I believe it says it makes contact when it's pushed in and no contact when it's free.

I bypassed the clutch switch but kept the side stand switch. I'm a bit of an idiot so its saved me a few times.

Fun stuff. I recently swapped my bandit 400 gauges for digital ones. I have a piece of paper scribbled with what the wires in my bandit 400 gauges do. Don't take this as gospel because my notes are rough and yours may be different so double check everything on the wiring diagram. Negative (BW)...

Wow what a beauty. I had a similar issue on my bike. Turned out it was the old wiring going from the r/r to that battery what was eating up the voltage. My bike was charging at 14 volts at idle and 13.2 volts at 5000 which is below spec. I went through and checked everything and it seemed to...

My bike was charging below spec. I went through and checked everything and it seemed to all check out. I cleaned all the connections, replaced the regulator, fuses. Nothing seemed to fix the issue. So ran new wires from the regulator to the battery. 12 gauge wire with a 25 amp fuse on the...

There's more vinyl thinner in the kraft slices.