Recent content by bent wrenches

  1. B

    No tail light / brake light on a 1983 Honda nighthawk 550

    Yes, I have power in and out of the stop/tail light box which is located near the rear of bike attached to the plastic rear fender splash guard. New bulbs as described in the repair manual, I guess I'll just keep messing with it, I have performed all the test as stated in the repair manual with...
  2. B

    No tail light / brake light on a 1983 Honda nighthawk 550

    Hello members, as the heading says, I have not been able to get the tail light or brake light to work on thus 83 Honda nighthawk 550, I have all the wires connected orange to orange, brown to brown, etc, etc. I have power going in and out of the stop/ tail light box, change the bulbs to the...
  3. B

    1980 CB750C Wiring Harness/Compatibility Help

    Not sure if this will help you, but I have a complete in good shape wire harness off a 650 if your interested that I would be willing to sell at a reasonable price , I accidentally bought off eBay just recently ? It's off a 1983 Honda nighthawk 650SC
  4. B

    Electrical issues on a 83 Honda nighthawk 550

    I'm glad to say I have solved this issue, hooray !! ;D I had the wrong plug in the selonoid, it was the only plug I forgot when I was making notes I was making for re-assembly. Now, I'm onto other issues with this bike, whew, glad that's over. Thank you for everyone's input.
  5. B

    Electrical issues on a 83 Honda nighthawk 550

    That's what I'm thinking, grcamna5. The only thing I can think is that it's getting a positive charge from either the starter or generator/alternator. I have checked everything or replaced everything, other than the ignition switch. I have dumped money into all these parts with no luck and...
  6. B

    Electrical issues on a 83 Honda nighthawk 550

    Ok, I stand corrected on it being a TCI and not a CDI, thank you Sonreir for for that bit of info, I was thinking it was a TCI, but I was under the impression it was a CDI. Ok, so if your telling me that the TCI should be safe from being fried, and I have the plug that plugs into the selonoid...
  7. B

    Electrical issues on a 83 Honda nighthawk 550

    You are correct, the seloniod on a 83 550 has a four blade plug, I really don't want to try to reverse than the way I have it plugged in now, I don't want to fry anything, now til I can figure out what color of wire plugs into the top of the seloniod. This weekend I'm going to start working on...
  8. B

    Electrical issues on a 83 Honda nighthawk 550

    Would the CDI have anything to do with the starter button not working, it's like theirs no power to the starter (?) How would I go about making a simple main wire harness and connect the pulsators, regulator/rectifier, and alternator, CDI box ? Then I will need to figure out turn signals and...
  9. B

    Electrical issues on a 83 Honda nighthawk 550

    Ok, I'll do that, thank you for the reply. I have a bunch of stuff coming for it, so I hoping to get it up and running, even if I have to make a wire harness, seems be enough info here on this forum to do it, but I plan on having lights, turn signals and such .
  10. B

    Electrical issues on a 83 Honda nighthawk 550

    Hello all, I'm a first time poster , long time reader , lol. Thank you allowing me to join. I'm having an issue with a 83 Honda nighthawk I bought, it had a bad main wire harness that was melted due to a battery that was hooked up wrong, I was able to located what appears to be a good harness...
Back
Top Bottom