Recent content by busse

I really like the mufflers. Go with the 4-4, in the end it will be worth all work and time instead of make a 4-1 or a 4-2. I reallt like the "megaphone style" with no reverse cone in the back of the muffler I think it's will be a cellebration to thoose vintage Honda race bikes like the RC166.

How are you doing the hydroforming? Have you just weld the two plates together and then pressurised with fluid or do you have some template (mabye not correct name) to put it in before you pressurise to get the right outside form?

I like the 4-4 exhaust systern on thoose old Honda engines, even if a 2-2 looks more clasdic with the Norton frame would I go for a 4-4. If it was mine build i would do the mufflers straight as the megaphones was on the vintage Hondas like the RC166. I like the pegs nice work, are the footpegs...

What a build I'm impressed, it's really that style I like

Thank you all that you like this totaly stupid project. I don't know if the CB200T has the same engine platform as the CB250N. I don't think EFI would be easy but alot easier than a carburator but I want the bike to be oldschool with draw tru supercharger and a carb. The build I work on now is...

Next step to get the bike more old looking was wire wheel, the rear wheel from some Honda CB250 K-model was easy to fit and the chain had the right offset I only had to do a new spacer on the right side to get the wheel in the swingarm. The front wheel was taken from a Kawasaki I think it was...

Un the winter of 2020, 2021 I did a belt guard for the drive belt and a new rear fender with place for the electronics and some other minor changes. So in the spring of 2022 I continue with test rides when the bike lean out under acceleration. I tested a Mikuni HSR42 but it was to big, so I...

I will do a thread about my CB250N cafe build. In 2016 i bought a broken CB250N that I build a cafe racer from and it was finish in the spring of 2017 and I drow it that summer. But in the beginning of the summer of 2018 I bought a Triumph Thruxton so the Honda was not used much, so what to do...

This is what the looks like now, I have run the bike about 1500 km this summer. Things to do is rebuild the front fork and I also would like to find some softer rear shocks, I often run the bike on bad roads and the rear end is to stiff. Any one that have any suggestions of good working rear...

The build is now a almost finish for this time, mabye I tear the bike apart and paint the frame and do a real polish of the engine. What's missing now on the bike is the stickers with the Honda logo and the racing stripes, seat cover, strip the cover on the engines right side from clearcoat and...

Hi, I'm Bo and I'm from Sweden so I hope you could understand my English. I bought a 1981 Honda CB250 last summer with a broken Engine and this is my first bike and also my first build ever, the plas for this bike when I bought it was to do a cafe racer. The engine was not running but the...