Recent content by dnhnky

What about the condensor? did you try swapping from one side to the other, also try the same with the coils.

I thought it looked like an exhaust tip they use on "tuner" cars, a quick google search came up with this: http://www.target.com/p/trademark-global-fast-the-furious-led-exhaust-tip-green/-/A-14062578 Looks like the same thing as the bike the girl is riding.

They do fit physically, you will have to jet according to your engine. Mine is bored to 594 and I have drag pipes. I still don't have the jetting right though. I am pretty sure I heated up the rubber parts of the manifold (in boiling water) and used the stock manifold (that bolts to the head.

My thoughts are since you have it apart, put it back together correct the first time. If you have to question something as important as a piston, replace it/them. On the other side: If you have more time than money, do what you have to in order to get riding. I tend to be in the later...

Sounds like you cam timing is off and a valve is hitting a piston. Haven't work on a CB 350 in a minute to tell you which timing marks to use. Go over setting up the cam timing again.

Check these out. I was looking at them for my SL 350 also. https://www.denniskirk.com/dg/universal-1-1-4-in-i-d-bolt-on-steel-silencer.p430945.prd/430945.sku