Recent content by Lewis_29tn

I have some remaining parts that I would like to get out of the house soon. - handlebars with original grips, controls (need to be gone through), clutch lever -engine case from torn apart engine -engine (locked) without oil pump and Pistons -front fender -tailpiece with light -chain guard...

The only other thing I have not done was try a new battery

I have a a 1993 FZR 600 what measurements do you need if you still need them?

Rebuilt the carbs before it started running bad then I rebuilt them again thinking something got through the fuel filter causing it to run bad; however that was not the case

Also carbs were freshly rebuilt

it's a direct line to the carbs and I know it is getting plenty of gas. So I know fuel starvation isn't the problem it just runs similar to that :-\

Hello Guys, I have built a cafe bike out of my KZ 55O about a year ago. About 3 months ago my bike has started acting up. The bike runs and idles, and when you lay on the throttle it revs to red line. However when you put it in gear and start moving it starts acting like it has fuel starvation...

Please let me know if you have a titled frame for a kz650 or a kz550A.

I just picked this up and can someone tell me what year this is? I was thinking 1978

A little update for everyone. Finally was able to get back in the shop and starting mocking up the bike. Not sure yet how I want the back end to work.

Due to work schedule and Ohio's fantastic weather, I have not been able to go any further on the bike. However picked up a set of these nasty GSXR forks to change up the front end. Once I get it back in the shop. I plan on mocking the bike up and see how much clearance I have with this front end.

Hope to join you guys. I'm from the Westerville area and hope my Brat kz550 will be reassembled by then.