Recent content by rcmorton

It's a 1976 honda cb360t.

So, I got my tires, tubes, rim guards in and wheels cleaned. Plan was to take it to a shop and have them put them on. Went by a place and the guy said I had to take the sprocket off the rear and the axle out of the front for them to put the tires on. Is this correct? I only ask bc the guy...

I got it squared away. It was a grounding issue, then a short.

I was having some charging issues so I bought what I thought was the rectifier/regulator combo. It is a BBT Small Engine Parts product B16310. It says it fits KOH 4140309. When I ordered it, I thought I was getting the KOH 4140309S. I now fear that I got just the regulator perhaps. I...

Thanks for the advice!

Yeah, that's what mine looks like except with a little black cap on it that keeps it from a full rotation. I'll take a pic and go ahead and pull it off. Thanks!

Very novice question here, I apologize. I've set my idle down to 1300 and want to adjust the fuel/air mix screw. I've read a lot about 1.5-2 turns out as a starting point. However, my screw as a black cap over it with a tab that hits a piece of metal on the carb so you can never get a full...

You mention the cb350, are the rims the same for the cb360? So, you suggest 90/90x18 on front and 100/90x18 on rear? Thanks!

Yeah, I've been reading and it looks like the AM26 might be a good option. 100/90x18 on the front and 110/90x18 on the rear

Just got the bike, tires are going to need replacing pretty soon for it to be road worthy. It has an 18in rim, I'd like to do same size tires on the front and back. What can you tell me about this? Good idea? Also, what brand/size do y'all recommend for a good look and good performance?

Sounds great, I'm right up the road from Converse maybe 2 miles over by Spartanburg High