Recent content by vbroom

Today we took apart both carbs and cleaned out a few small blockages. Mainly fuel gunk from stale fuel as the bikes been sitting for a while. We also took the front hub off and regreased the drum lobes....much better lever feel now. Also installed new tank lid with fuel gauge. Gives the tank a...

oops havent replied for ages. sorry..the powdercoaters sandblasted everything first to rough it up. So anyway, the projects still goin....2014 will be the year we finish this bike. After months and months waiting, we got our compliance plate remade. A company in switzerland by the name of...

manifolds were modified stock ones..with radiator hose and hose clamps. can't remember where carbs were from....we had to wait a few months to get our hands on them! bit of an update of whats happened since the last post.... we got a letter from our friends at the DoT regarding the...

oops havent updated this thread for a while. iginition was called petronix...i think we got it off les barker from vintage advantage. A quick go on the google machine should pull his details up for you. so we got the bell end cut off the stacks. ID of the stacks was a tad to small of the carb...

thanks mate:) the left hand switchblock is an ebay job...had a few weird functions though. The switch which normally flashes highbeam was a killswitch?! strange.... also try dime city. I think they have some switchblocks as well..

not overly exciting footage...but heres a vid of the lights all hooked up! http://www.youtube.com/watch?v=BwomTvoupKE

milestone today. We are practically done with the wiring!...well...almost. we worked through the whole weekend to get it done :D what we started with.... rear loom looks ugly but is done. will be hidden with tape etc. also did the quick turn throttle mod. still have to sort out brake...

got our parts back from the shop. The parts above were water jet cut! really cool stuff what they can do. Here's the new battery box test fitted parts fresh from the powdercoaters. Fitting it all up tonight then turning our attention to the wiring loom.

thats exactly the same! but we got ours from ebay from a different seller.

geebus...it's been over 3 months since we've updated this thread...time to get it moving again! so we've resorted the fuelling...got some inline fuel filters and replaced the bunning pvc hose with some proper fuel hose. now for some custom stuff. this is the old battery box after some...

two years of blood and sweat. Druu, pokopano and myself are proud to share our moment of pure joy!!! http://youtu.be/zXxSocarTeY

we had to get the exhaust redone as there was no clearance with our rearsets. some nice welding work done by brad :thumbsup: wrapped up both exhausts. next we turned to the inlet manifolds. As we're running non standard VM-20s the manifolds were slightly off so we cut slots in them to...

still going. we bought some coils and mounted them. decided the tacho we got wasnt gonna work on the bike with a speedo so we ditched in in favour of this one. and just the other day we got some rare VM20s. we had to wait about 3 months to get our hands on these. new battery as well...

yeah most of our parts are off ebay. dime city cycles is basically the only online store we regularly hit up for parts. so today we got our bike back from garageprojects. we got them to weld up a mid pipe between our headers and new mufflers. came up nicely with some heat wrap. also...

sorry bud. had a look through our spare parts bin and looks like we ditched the controls a long time ago:(