Search results

Oh yeah already did that, a while ago, just haven't posted any updated pictures! Did what you did actually with taking the bracket from the stock fender! Also took the tensioner off because it interferes with the electronic ignition mounted bracket, lifted the bike up about 1/2” as well and...

Just installed the Common Motors Shockwave Electronic Ignition and I am truly blown away!! My 360 is running better than ever, no stutters or stumbles, constant power through each gear, really impressed with the ease of install and overall quality!

I have a set of 7/8’s clip-ons that fit a CB360 or 33mm fork and an 18” long baffle with a 2.583 O.D. - I got a pair of them on eBay (used from some Kawasaki) and only needed one to fit inside my shorty 12” cone engineering exhaust- (exhaust not included but shown as an example) Just pay...

Thanks for the tip! Thought about doing that but ended up doing it the hard way haha

Oh snap good to know!! Will do if I start getting some movement

Sweet! Glad other people have had a similar experience! I threw some loctite on their as well but I pretty much do that on every bolt with this bike due to the vibration.

Hey all, Been looking for a set of adjustable clip-ons for my 1974 Honda CB360. I've done so much research but never seem to find a simple set that was adjustable for the angle. Everything I could find cost an insane amount or you had to buy additional plates to adjust the angle of them. Well I...

Alrighty so here’s the update! Looks like it was a few issues. I ended up sticking with the master cylinder/lever I bought from eBay (the 16mm one from the goldwing) because the one from 4into1 was wayyyy to big, I also don’t need mirror screw holes so going to return them. I added some washers...

Ah I meant lever/mc combo. Yeah stock uses a 14mm piston so originally I wasn’t sure if 16mm was too big since that’s what seems to be sold everywhere for her 360, other than common motors, they sell a 14mm lever/mc combo

Brilliant info here, everything is arriving today at some point so I will report back once I give it a try, if the lever is still causing issues after I have installed the new caliper and made sure the pads are even on the disc I will definitely be looking at a higher end lever! Feel free to...

I ordered these since it has the brake switch built in, don't it's adjustable though? https://4into1.com/80s-style-master-cylinder-w-clutch-lever-set/

Yeah I think that might be the issue is the pad not aligning with the disc properly, either way I went ahead and ordered some new parts, great advice on the washers on the top bolts to level it out, will report back once everything arrives!

Well after further inspection after taking these pictures I think my new caliper front is dripping from the banjo bolt. I bought it on eBay, who knows. I think at this point I am just going to order a set of levers from 4into1 with a 5/8” piston, a new caliper front and a new brake hose adapter...

Hey all, I have a 1974 CB360 and when I bought it, it had a master cylinder from what I believe is a goldwing. I recently replaced the caliper assembly along with a new stainless steel brake line. After hours of bleeding and running a 12oz bottle of fluid through, the brakes still felt soft and...

Dayyuummm super clean!

I bought them from Revzilla (here) but they also have them on Amazon (here) and other sites - they do have different styles but if you want the ones that have the running light, brake and turn signals make sure you get model number 2858 for satin black or 2857 for chrome - also, they don't...

Yeah, when I was searching for some I wanted small but damn these are micro haha, truly can't believe how bright they are -

Thought I would update with the latest pictures here - waiting on the front fender bracket to come in for the forks (thanks @crazypj) for the tip but it’s finally up and running again. Still need to get the carbs dialed in - having some sputtering in 1st gear. But thanks to everyone who gave me...