Search results

Hi All, Here is a quick update and some photos below. I’ve been working through the phased plan we outlined earlier: bearings → internal spacer → axle/wheel centering → caliper spacing / rotor matching (current focus). Progress so far: - Bearings: Installed 25×47×16mm (63005-2RS ×2). They...

This is great - I have a plan for the bearings now, and I presume the internal spacer for a 25 mm axle is easy enough to source or machine. Based on all the input so far, I’m feeling good about moving ahead with the VFR wheel. It should make for a fun front-end assembly project. I really...

Doug, thanks for jumping in with this, really appreciate seeing it from from another angle as you proposed. Your point about rotor diameter differences between ZX10R model years is a good call-out. In my case, the VFR800 rotors are 296 mm and the ZX10R rotors I have are 310 mm, so there’s a...

Thanks so much for taking the time to write this, genuinely appreciate the detailed insight. On the front setup, that all makes a lot of sense. I figured the bearing swap and center spacer could be handled easily enough on the lathe, and your confirmation on that is really helpful. The rotor...

Hi everyone, I am at a junction and hoping to tap into some expertise before I commit too far in one direction - seeking insight and technical guidance. I’ve dug deep into the world of VFRs and learning as I go. It’s such a fascinating machine honestly — and I wish I had one, but I don’t...