Search results

  1. pidjones

    CAFE CREME - BOARD.....TRACKER

    Details are never really minor.
  2. pidjones

    '75 GL1000 - "Pete"

    All that is needed for a test ride now is a new diaphragm for the front MC reservoir (on order). That, and good weather.
  3. pidjones

    '75 GL1000 - "Pete"

    Much of the excess weight of a GL is in the engine. I've seen them mono-shocked, and wasn't impressed. Just as they come stock (with no added fairings and such), they are very capable "around town" bikes. All that I added to the '79 that I had was a luggage shelf to bungee things to. My '78 with...
  4. pidjones

    '75 GL1000 - "Pete"

    STILL waing for front tire. Ordered on Amazon, rear came in but front (from a different vendor) still delayed in shipping.
  5. pidjones

    '75 GL1000 - "Pete"

    Wheels are back off and waiting for tires to come in and be mounted.
  6. pidjones

    '75 GL1000 - "Pete"

    It lives! Started on gas squeezed into the carb float bowls with a squirt bottle. Muffler will be mounted while the wheels are off for new tire (on order) mounting. I'll mount the tins after she gets a road test then.
  7. pidjones

    '75 GL1000 - "Pete"

    Carbs mounted. Just need plugs and air cleaner installed, then I'll fill the carbs with a squeeze bottle and try firing her up.
  8. pidjones

    '75 GL1000 - "Pete"

    Now on her own wheels. Still need to mount and connect the carbs and flush the storage oil from the gas tank.
  9. pidjones

    '75 GL1000 - "Pete"

    At least the front wheel is under it. Agreement with the wife is that bikes have to run before ordering new tires. I guess rear wheel, cooling sysstrm, and carbs go on Friday, and start attempt Saturday (rain forecast Sunday).
  10. pidjones

    '75 GL1000 - "Pete"

    Things looking better now. Wiring 95% complete and tested. Might get to attempt fire-up by next weekend if I get wheels under it.
  11. pidjones

    '75 GL1000 - "Pete"

    Oh, it got better. The fan that moves cold air from the freezer up to thr frig wasn't moving any air. Coils frozen over.spent two hohrs defrosting them.
  12. pidjones

    '75 GL1000 - "Pete"

    Wish I had. Instead, took the tractor out to do some mowing. Ended up running over something causing ~1" gash in the left rear 23x10.5x12 turf tire sidewall. Two plugs are holding 12 psi for now, but I doubt they will hold up to mowing.
  13. pidjones

    '75 GL1000 - "Pete"

    Decided to do the brakes instead. Bad choice. snapped off the bleeder in the Right front caliper, then an EZout in that. Lurking ebay for a replacement.
  14. pidjones

    '75 GL1000 - "Pete"

    Thermostat, housing, upper water tubes and upper motor mounts all on. I guess wiring harness and shelter frame come next.
  15. pidjones

    CAFE CREME - BOARD.....TRACKER

    A little bit of progress every day and BOOM! You're riding.
  16. pidjones

    '75 GL1000 - "Pete"

    Finally able to post a photo, such as it is. Yesterday, my neighbor came over and helped to lift the engine from one dolly to the one with doubled 2x4s on it. This morning, I was able to mount the frame (loosely) to the engine. My philosophy is to make small amount of progress daily.
  17. pidjones

    Patina-ed paint

    Rustoleum Appliance Epoxy is actually an enamel.
  18. pidjones

    '75 GL1000 - "Pete"

    Rear drive (swing arm) is cleaned and painted. Frame ~80% primed. Had to finally order a new knotted wire wheel for the angle grinder. And ran a magnet nail finder over the drive to keep from picking a piece up in a tire.
  19. pidjones

    '75 GL1000 - "Pete"

    Got about a third of the frame buzzed off and primed. Ran out of energy. Storming right now, but in a couple days may be clear and warm.
  20. pidjones

    '75 GL1000 - "Pete"

    Rolled the engine (on a furniture dolly) outside and painted it. Hope to get weather tomorrow for cleaning up the frame and swingarm, and getting a coat of primer on them.
Back
Top Bottom