DrJ
Over 1,000 Posts
I have 2 pairs of CB350 carbs. Both are in very good shape and easily rebuildable. I recommend ordering OEM carb packing sets and float valves from a Honda dealer rather than those aftermarket carb kits. I've gone over them very thoroughly and made sure everything was in working order. Diaphragms are all good with no tears and are soft and pliable. The slides move freely and smoothly. I cleaned everything with Honda carb cleaner and got most of the grunge off. All springs and pivots are tight and smooth. All valves are intact. Both have stock jets 105 & 68. These carbs are difficult to come by in this shape. Both prices include shipping to anywhere in Canada or Continental USA.
Pair #1:
This is the better pair of the two. Carb tops have good chrome with minimal pitting. Overall in very clean condition. $120.00
Pair #2:
Not quite as clean but still in very good mechanical condition. Tops aren't quite as nice, pitted. Missing choke linkage attachment bolt and nut but any 4mm bolt and nut will work. $100.00
Pair #1:
This is the better pair of the two. Carb tops have good chrome with minimal pitting. Overall in very clean condition. $120.00
Pair #2:
Not quite as clean but still in very good mechanical condition. Tops aren't quite as nice, pitted. Missing choke linkage attachment bolt and nut but any 4mm bolt and nut will work. $100.00