Cb350f part out

[BCBarker]

Rescued this from my friends neighbor. It was hours from the scrap yard. Pics are from Pre-wash. It not in horrible shape, but its far from perfect. It has the stock air box. Only one side cover. I'm keeping the carbs, but only need the bodies so if you are looking for bowls they are up. I'll post more pics tomorrow.

 

[Traveler350]

You should keep the whole thing and make a cafe!!! Sweet bike man.

 

[BCBarker]

I would but I already have a few in the shop. Need to buy more parts to keep em running!

 

[scfire]

What would you need for the seatpan, hinge and latch pin. No foam or vinyl needed unless of course there are no tears and the price is awesome.

 

[mikewerx]

any dents in the tank, I could try and use it if it's not dented. And how about the throttle control? - I actually just need the red switch from the throttle control box...

 

[BCBarker]

the seat is dirty, but I don't remember any holes or rips. I'll clean it up and take a few pics today and come up with a price. I think you would be looking at $25 in shipping.

What would you need for the seatpan, hinge and latch pin. No foam or vinyl needed unless of course there are no tears and the price is awesome.

I don't remember any dents. I do know there is some surface rust and that the tank has been painted before. I'll hit it with a little sand paper and make sure it's only surface rust, and that the inside is coat-able, then get some pics and come up with a price today.

As for the switch, I'd rather sell the whole switch assemblies than just the red switch. Pics and prices later today.

any dents in the tank, I could try and use it if it's not dented. And how about the throttle control? - I actually just need the red switch from the throttle control box...

 

[yorkie350]

Ime in with Traveler350 man keep it for a sweet project 8) theres more there than some of us started with ( did it come free with the rust ) ;D but at the end of the day a man gotta do wot a man gotta do :

 

[BCBarker]

Also consider I have 1 350f already, and another lead on a free one that's in dry storage. Since this one is locked up, it becomes spares to help others ride on.

 

[yorkie350]

I love the 350f they must grow under trees over there mate there as rare as hens teeth over in the UK but the 400f is easier to get hold of and there parts might shoot for one of them next time round : good luck with ya builds thread em up ile keep watching cheers mate

 

[mikewerx]

Great, I'll look out about the tank. I was about to Bondo a couple dings in mine, but if yours is good...

And understand about the switch, just let me know what you can hood the assembly for. Thanks

I don't remember any dents. I do know there is some surface rust and that the tank has been painted before. I'll hit it with a little sand paper and make sure it's only surface rust, and that the inside is coat-able, then get some pics and come up with a price today.

As for the switch, I'd rather sell the whole switch assemblies than just the red switch. Pics and prices later today.

 

[mikewerx]

And how about the left crankcase cover, the back one under the carbs... just noticed mine has a small crack at the top. thanks

 

[BCBarker]

Seat is pretty Good. could use a new strap and new chrome trim, but the cover is good and foam is soft. Seat pics:

Tank is solid with more exterior rust than interior. I will clean out inside to make sure, but it still has gas/varnish inside so it does hold liquid. If no one buys it soon, I'll red vote it and repair/prime/paint the outside... But then the price will be more
Tank pics:

 

[scfire]

Gotta price in mind yet on the tank andy seat?

 

[Kemp]

I"m interested in the tank , have only engine and frame from CB350F so will make a cafe racer for sure. The rust on outside near seam looks a bit rough but no leaks ??

 

[BCBarker]

the rust isn't near the seam. It's just at the bottom. I think I'm going to go ahead and clean and Red Kote the tank this weekend and possibly take it to primer and fix and rough areas to make sure it's a soild tank. I bought a CB175 tank once that was swiss cheese and was upset that someone sold it to me. I'd feel better knowing it was usable before I send it to someone. If it isn't, I'm only out the time to strip it and the stripper... but that has taken my money before If it's good, Then you get a tank in good shape that has been Red Koted and primed. (I may even have my buddy paint it for me. He owes me and works at a Dupont Body Shop)

 

[BCBarker]

All parts shipped out yesterday Still have plenty good ones. Let me know what you are looking for and if I have it, lets make a deal. All prices/offers are negotiable!

Also interested in trades on S90 and CB750F compatible parts.