cb500 550 parts

bradj

Over 1,000 Posts
DTT BOTM WINNER
im in the middle of redoing my floors and i would like to try to round up some extra cash i have a lot of 500 550 motor parts i am sick of moving this stuff around i do not need any of this stuff any more so the price is real flexable i have a few pictures but i will post pictures of any thing im asked to every thing is make offer ill get shipping totals

71 cb500 cases with a custom shift drum retainer and shift forks
several 500 trans and extra shift forks
a std std 500 550 crank and rods
std set of 550 pistons used but cleaned and fine
500 clutch basket and all the steels and disc
a clutch coved and few sprocket covers one drilled
a few 500 550 oil pans and oil pumps
two cylinder heads and a good cam
one or two tack drives and cable in great shape
a rack of pd 550 carbs not locked but real tight
a cb500 front end rusted in the head light area
several stock shifters and kickstarters
a complete 77 550 motor that is locked
a un cut 77 550k harness
a nos taillight lens for a 500 550 350 750
a pretty good stock rear fender for a 550k
i know there is more so ask if there is some thing you need
 

Attachments

  • DSCN1034.JPG
    DSCN1034.JPG
    220.9 KB · Views: 206
  • DSCN1181.JPG
    DSCN1181.JPG
    225.4 KB · Views: 215
  • DSCN1242.JPG
    DSCN1242.JPG
    216.3 KB · Views: 215
  • DSCN1248.JPG
    DSCN1248.JPG
    202.9 KB · Views: 215
more
 

Attachments

  • DSCN1255.JPG
    DSCN1255.JPG
    222.5 KB · Views: 210
  • DSCN1108.JPG
    DSCN1108.JPG
    207.9 KB · Views: 214
  • DSCN1037.JPG
    DSCN1037.JPG
    218.7 KB · Views: 206
  • DSCN1029.JPG
    DSCN1029.JPG
    202.1 KB · Views: 211
Good looking stuff. I am looking for a few items for my 1978 CB550. I'll list a few items, some I see pics of, others you might have laying around. Clutch plates- do the one for a 500 work for the 550? Price? The shorter of the clutch cables, I think early and late models had 2 different lengths. Front brake brake caliper rebuild kit, or replacement caliper. Not sure what year the brake parts in the pic is for. Price? Of course I'm looking for a helmet, after seeing some of the vintage, 3/4 helmets with the mouth guards. I'm totally looking for one. Also looking for carb jets. Sorry for the random list, the bike has been sitting 1.5 years and I need a kick in the butt to get it going again.
 
the carbs are off a 77 550 k there pd carbs i run the same carbs (different set) on a big cam big ported 500 and they work great on my other set came off of a sohc cb650 i think kz750 run the same ones also i think there 29mm but i have not measured them
 
xratt said:
Good looking stuff. I am looking for a few items for my 1978 CB550. I'll list a few items, some I see pics of, others you might have laying around. Clutch plates- do the one for a 500 work for the 550? Price? The shorter of the clutch cables, I think early and late models had 2 different lengths. Front brake brake caliper rebuild kit, or replacement caliper. Not sure what year the brake parts in the pic is for. Price? Of course I'm looking for a helmet, after seeing some of the vintage, 3/4 helmets with the mouth guards. I'm totally looking for one. Also looking for carb jets. Sorry for the random list, the bike has been sitting 1.5 years and I need a kick in the butt to get it going again.
i think the clutches are the same i have a extra 77 cb550 motor the clutch in it would be the same if you really need it i will pull it a part. bike bandit would be a good place for you to cross ref the part numbers from a 71 500 clutch fibers the caliper should be the same you can usually just take a caliper a part and clean the bore and seal and rebuild with new brake fluid and there fine at least try i donot have any cables and jet are only a few buck new as far as price just make me a offer and well figure things out from there
 
need a complete wiring loom from headlight to tailight plus complete electrics and controls and coils. Do you have?
 
Brother please pm me I may be interested in all of your covers (clutch, sprocket, stator, points) and the gas tank.
 
anything in the way of '74 - '75 CB550k Compatible Wiring Harness?
 
OneWheelDrive said:
I need the set of carb boots between the carbs and the airbox. How much shipped to 92024?
ill sell you the boots for 15 plus 7 to ship
 
Back
Top Bottom