CB550 cross drilled rotors..........SOLD

[tjjkc]

I got bored and decided to drill some discs,I have 3 basically the same pattern ,different hole diameters,I was thinking about asking $35 each ...you pay the actual shipping.... or pick up(Newcastle On) you get to pick which you would like,they are numbered 1-3 starting from the top left........one needs to be painted,on has some light grooving....If you buy one and are not happy bring it back ,I will refund you less the shipping.....I am going to "Guess" and say shipping will be around $15 to the US....did a quick estimate and $22 to California

 

[saucer]

Re: CB550 cross drilled rotors

hi i'm interested in one of these, have you used any of these disk yet, do they work fine?, let me know shipping to toronto,
thanks

 

[tjjkc]

Re: CB550 cross drilled rotors

"Saucer".did a quick Can post to M2M-1G5 Yonge st and it came out to $8-10.............I was having problems with squealing on my 78 550k so I thought I would try drilling,I put the disc that is in the top pic on my bike today,random orbit sanded lightly on the disc ,to remove the glazing,same for the pads,.went for a ride....my opinion the brakes were better...the stock brakes on these bikes 350,550,750 aren't the best so I thought any improvement will help...I have heard that in the wet/rain drilled discs are a great improvement...I will prob never find out

 

[saucer]

Re: CB550 cross drilled rotors

"Saucer".did a quick Can post to M2M-1G5 Yonge st and it came out to $8-10.............I was having problems with squealing on my 78 550k so I thought I would try drilling,I put the disc that is in the top pic on my bike today,random orbit sanded lightly on the disc ,to remove the glazing,same for the pads,.went for a ride....my opinion the brakes were better...the stock brakes on these bikes 350,550,750 aren't the best so I thought any improvement will help...I have heard that in the wet/rain drilled discs are a great improvement...I will prob never find out

hey thanks, i just have to find out if your 550 disk are the same as a 450 disk,that's what i'm buying for, i'll find out & get back to you, tey look great,

 

[locOleoN]

Re: CB550 cross drilled rotors

How much to drill those holes into Saucer's Tank?.. I"ll pay for it!!..




;D

 

[saucer]

Re: CB550 cross drilled rotors

How much to drill those holes into Saucer's Tank?.. I"ll pay for it!!..




;D

hey you know nothing about this, it doesn't involve glow in the dark stickers, or matte black rattle cans,so it's a bit out of your league,

 

[locOleoN]

Re: CB550 cross drilled rotors

hey you know nothing about this, it doesn't involve glow in the dark stickers, or matte black rattle cans,so it's a bit out of your league,

Very true, but Id just figure thats what youd want next, as a buddy, I'd pay for it!!... ;D

 

[lil beast]

Re: CB550 cross drilled rotors

Hey saucer, lets go for a ride out to newcastle and grab these.. ;D I could use one for the project. This thursday rain thing is bummin me out.

 

[saucer]

Re: CB550 cross drilled rotors

Hey saucer, lets go for a ride out to newcastle and grab these.. ;D I could use one for the project. This thursday rain thing is bummin me out.

alright let's do it,

 

[manchestermichael]

Re: CB550 cross drilled rotors

is the center hole the same for most old Hondas as i have a cb360 wheel 4 bolt disc but dont mind moding it drilling extra holes to fit as long as the center hole is about the same

 

[tjjkc]

Re: CB550 cross drilled rotors

is the center hole the same for most old Hondas as i have a cb360 wheel 4 bolt disc but dont mind moding it drilling extra holes to fit as long as the center hole is about the same

Sorry I have no idea and would not even want to guess.........I would prob be wrong...............