cl350 problems can i get some help?

[thehands]

hi its me for the 20th time. This time once again I am rebuilding my valve mechanisms. does anyone know of an informative good cl350 valve mechanism video on youtube because I am at a loss and i did a few things wrong last time so help would be great. thanks

 

[thehands]

Re: cl350 problems.

I have looked at the manual and it isn't very helpful either I am not understanding the instructions or something but i can't understand it. I am assuming from the lack of answers that no one has the information I am looking for even hints would be helpful or if you know how to do this and want to describe it in detail that would be awesome.

 

[alzcbz]

What, specifically, are you looking for?
Valve adjustment? Lapping? Removal/Install? Parts?

 

[thehands]

installing them sorry for not explaining that.

 

[alzcbz]

As for installing the valves there's not really much to it.
Install the valve into the head.

Install the large and small springs over the valve stems. Make sure they are oriented as they are in the manual. The tighter part of the springs should be towards the head.

Install the retainer.

Use a spring compressor to compress the springs.

Install the keepers and release the compressor.

 

[thehands]

i meant installing the cam like setting the crank at LT and the L on the cam horizontally.

 

[alzcbz]

Here's a full teardown and rebuild from Jphoenix on HondaTwins.
http://www.hondatwins.net/forums/48-engine-discussion/17947-sl-350-engine-rebuild.html
Lots of pics.