DO YOU NEED TO REJET THAT CARBURETOR????

hey,get in and shop her
how do i get the bad gas scum ,mung and droolstink outta my careberater?
stinks bad, like old gas bad
what is the bestway clean the carbie ?
thankx !
 
xb33bsa said:
hey,get in and shop her
how do i get the bad gas scum ,mung and droolstink outta my careberater?
stinks bad, like old gas bad
what is the bestway clean the carbie ?
thankx !

I just posted this same question about what is the best method for carburetor cleaning on another forum. So far what has worked best for me is the old school elbow grease and lots of carb cleaner and air gun method. But I have heard lots of good things about the ultrasonic cleaners!
 
Some of you guys might not have an air compressor to clean out the inside of the carburetor so instead of an air compressor you can use cans of compressed air. You can find them at office supply stores. They work great!
 
mlinder said:
Holy shit, there is no way I'm going to read that wall of text, homeboy. I already have a headache, I don't need a migraine.
Hahaha, sorry I'm not trying to be a dick in the pissing match but that shit is funny
 
getindachoppa said:
Some of you guys might not have an air compressor to clean out the inside of the carburetor so instead of an air compressor you can use cans of compressed air. You can find them at office supply stores. They work great!

Smart suggestion. I use cans of air when the compressor tank had a leak. They are also easy to use to direct a stream of air where you want it and are light and silent compared to a compressor.

Ultrasonic cleaners are a must since the old cancer growing versions of carb dip tanks have been banned. What's most important are the small drillings for fuel and air inside the carb. Those must be clean and clear and not hogged out by poking paper clips etc through the finely calibrated jets. They must also match one carb to the next.
 
teazer said:
Smart suggestion. I use cans of air when the compressor tank had a leak. They are also easy to use to direct a stream of air where you want it and are light and silent compared to a compressor.

Ultrasonic cleaners are a must since the old cancer growing versions of carb dip tanks have been banned. What's most important are the small drillings for fuel and air inside the carb. Those must be clean and clear and not hogged out by poking paper clips etc through the finely calibrated jets. They must also match one carb to the next.

We all must learn patience from the master
 
SILLY MORTALS.... NEVER FEAR! BECAUSE.... CAPTAIN CARBURETOR IS HERE!!
 

Attachments

  • Powdered_Toast_Man_by_InspirationIsFree.jpg
    Powdered_Toast_Man_by_InspirationIsFree.jpg
    129.7 KB · Views: 282
I am not going to start off by telling you what you are coming across as. I believe you have good intents in helping others by sharing knowledge.
But why did you start this thread with a title that's a question if you already know the answer?

As you can see, you've gotten off on the wrong foot with many members. I personally opened this thread after reading the title to see if I could help out, then proceed to read your statements that are basically common knowledge. Sure, newbs may not know.... and you will probably help some out someday.
But you probably hadn't ought to build this throne for yourself, plop you ass in it, and declare your infinate knowledge to the forum. You are just BEGGING people to throw stones. It might be better if you were to start a blog of your own out on the interweb, post with common questions, and proceed to give your input along with random tips-n-tricks ... those seem popular.

The best thing out of here for me was the vision of Alpha sitting on a little stool squeezing a goats teat. :)
 
Back
Top Bottom