Enfield Twin With Dunstall Exhaust

High On Octane

Ton Up or Shut Up
Finished up my exhaust this week. I converted the dual exhaust to a 2-1 exhaust and installed an Emgo Dunstall replica muffler. I cut the core baffle down to 3" and is sounding really good. I'm hoping to have the bike finished next week. :)


http://youtu.be/3i2h4BlEYW0
 
I made a couple of changes to the exhaust this week. While the 1 3/8" primaries into a 1 3/8" collector produced a mass of low end torque, she just couldn't breath up top. So I cut the pipe right at the 2" wide mark and installed a 2" exhaust pipe from a Subaru Outback that had the exact same bend at the bottom area. I slightly smashed the pipe to oval it and match the collector and then tack welded it in place. Then I trimmed the "silencer" to a 2" opening, bolted it to the frame and then moved it until it cleared the shifter and tacked it into place. A quick look over and then proceeded to final welding and re-wrapped the new section with the header wrap. The results moved the power range to about 4000 rpms+. Now she is a pooch down low, but when she hits 4000 rpms she comes on like a 2 stroke power band.





The first video is just the bike idling and the second video is a fly by.

https://www.youtube.com/watch?v=f0uJiGM8NKg&list=UUOuxT3uDOINbn5OmZ0BwRVA

https://www.youtube.com/watch?v=kSfpy0anocQ&list=UUOuxT3uDOINbn5OmZ0BwRVA&index=1
 
Back
Top Bottom