**FS: Red Metal Flake LSI 3/4 Helmet - LARGE**

locOleoN

Is that the best you got? OK.. now my TURN...
The last one from my collection that I've decided to send out into the world so that someone else can enjoy it..

Its a size Large Red Metal-Flake LSI helmet.
I personally took this helmet apart, seperate the head foam, cleaned it out re taped the lining back to the head foam, covered the inside with felt and took-chest liner.

The original side foam is still very soft and supple. Not crumbly or deteriorating.

its an 8.5 out of 10 shape

I wont be too sad if this helmet does not sell.. ;D

Here is where I seperated the helmet:
IMG_1551.jpg


Origninal marking on the foam:L for Large
IMG_1550.jpg


Retaped the original lining after I cleaned it out:
IMG_1554.jpg


The new top pad lining inside:
IMG_1557.jpg


The helmet all back together:
IMG_1558.jpg


Voila:
IMG_1589.jpg

IMG_1590.jpg

IMG_1588.jpg


this helmet sits very low on your head.. It does not stick up like on space balls :)
IMG_1585.jpg


$100 + shipping
 
Incidently, LSI stood for Lear Siegler Inc. who, among other aerospace & power products also made consumer durables, including the LSI 4150 helmet, which was DOT approved in many states.
http://www.vsp.state.va.us/downloads/VA_Motor_Vehicle_Approved_Equipment_List/13_Helmets.pdf

They have original stickers on the back that say “ LSI 4150 Exceeds Z.90.1-66” Made in the USA

They stopped making helmets in 1977…

So take it for what it is.. I do have an extra SNELL DOT sticker I could give you if you choose to buy one of the helmets…
 
Back
Top Bottom