Honda CB 400 T II Hawk 78

Laevis

New Member
Hi fellow riders.

Couple months ago I started building a cafe from a 78 Honda cb 400 Hawk T II and everything has come beautiful till now. I got a problem with my front fork, I just saw tons of rust in the tubes and It seems it would be really difficult to repair (re-building the tubes + chrome + etc. = $$$$). I was wondering if you guys coud help me with some feedback, I was thinking about buying a front fork of those new honda motorcycles (like the honda NX 400 Falcon), but I don't know the dimensions. I need a front fork with 33mm tubes. Do you guys know what kind of new models of motorcycles i can use? As I said I thought about the NX 400 since it has almost the same Engine dimension.

I accept any comment.

Thanks.
 
You may want 33mm tubes but you will be far better off with something larger diameter. Just find a fork with 35@41mm tubes then post about conversion. It isn't too difficult, you can do just about any fork conversion with hand tools but some may require a little welding or fabrication.
It will be more important to get length right, modern sportbikes USD forks are generally much shorter than bikes designed in the 60's, 70's, 80's
 
Thank you so much.

I think I might go for the option about increasing the size a little bit. Well, I talked to a friend and he gave me 2 options, the first would be to increase the size, and the 2th would be to build new pipes, well he told me he knows somebody who can create a couple of steel pipes with hard crome (so I can re-use the same bottom cases). He also told me it could be around 420$ for the pair (He said his friend has done it before for a Honda CB 750 and It still works fine). I think this last option sounds good too.
 
Sorry, $420 is way too much when you can get a better front end for less money and only a little more work
Unless bike is immaculate (better than when it left factory) there isn't a good reason to keep it stock.
 
If you're interested in keeping stock forks, I have a set from a 78 that I'm selling, wouldn't be able to ship it to you until the end of the month though.
If you want to convert though, check out allballsracing.com, they have a list of what front ends you can swap on to your bike. Pair that with the fork diameter list posted to figure out which ones are thicker than your current setup.
 
Back
Top Bottom