Mother. F'er. Stuck slider bushing. And I mean STUCK!

Killman77

当有疑问时踢你的敌人在生殖器上,你可以道歉后
Changing the fork seals on an '82 Hawk, and it's just been a fricken' nightmare, since 8 o'clock Day 1.

Every. Freaking. Bolt. Is. Frozen. Period.

Spent what feels like half my natural born life on this thing. Lubing, heating, tapping, swearing... Thought I was finally away and home, then realized that even though the fork uppers came out, the slider bushing somehow mysteriously defied the laws of time and space, and is in fact firmly seated in the lower. Refusing to come out, so that I can re-insert the fork upper, seal, back-up plate, cir-clip and dust boot, re-install the fork, and get on with my fucking life.

Any bright ideas, up to and including lighting this POS on fire would be greatly appreciated. My latest brainwave involves freezing the upper, heating the lower and having at it with a giant Harleyquin rubber mallet. Might sound extreme, but the bike started it, Your Honour.
 
Well, I'm about out of options, even talked to a machinist and no dice for a clean solution.

I've tried running it in the heated ultrasonic cleaner, I've tried freezing the upper and heating the lower and slathering everything up with ATF, I've tried a gear puller and then even a rubber mallet. Can't get the bushing out, can't get the upper past the bushing.

I'm going to try to find something along the lines of an oil filter wrench to compress the fork upper bushing enough to maybe get it started into the fork lower bushing. That's my last bright idea, then it's down to grinding through the lower bushing and replacing it. Hopefully with a light enough touch on the grinding to not damage the interior of the fork lower.

It's been interesting to see what happens to the inside of an air assist fork that hasn't had air, or enough unpolluted oil to matter, in it for years. Surprised that the springs have held up.
 
are we talking about a steel sleeve inside an aluminum housing ? if so heat is your friend aluminum grows with heat 2 times as much as steel get it near smoking hot 300 degrees plus
and try getting it out while hot
 
i keep a old electric deep fryer for just that kind of thing

stick the fork in the oil in the fryer and leave it for a while

350-400 degrees will loosen it

you might get it by putting the fork in boiling water for a half hour or so
 
As far as I'm concerned, your both fricken' geniuses. I'm leery of taking a torch to the aluminum, as I can't regulate the heat. So that's my last resort.
I've got water going in a double boiler and I'm on CL looking for a deep fryer as we speak.

Damn I'm going to be happy to see the back of this thing. Gonna be nice to get my shop back. 8)
 
go to walmart (open all night ) get the biggest one they have

do the dirty deed

and then take it back

but is you get one to keep you should see how fast they will un stick frozen rings on a piston

or free up seized locks
 
Good to know. Got a ring job coming up.

Just got back from picking up a $25 fryer from UsedVictoria.com.

This is gonna be awesome, it's my first time deep-frying a motorcycle!
 
just be careful that stuff gets hot and warn people if they come in your shop
 
as far as the torch goes just keep the flame moving and it is safe common sense,use it ;)
you could also use the bbq grill to warm it up
i like the hot oil method,fersure, but all you really need is a good propane torch
 
Got her in the fryer at the top setting, (350 degrees) how long does it usually take? Figured I'd give it about a cig. or two.

Boiling water for 30 mins. didn't get it. If the fryer doesn't work, I guess it's the torch for a bit. Damn thing's really jammed in there. Nothing to get a grip or leverage on.
 
Never mind. Just came loose! Holy SHIT! CXman You. Are. The. Man.

Gonna be busy doing the dance of joy for a bit fellers.

4 mins., by the way, in case anyone wants the recipe ;D
 
by the way the trick with stuck piston rings is

in the fryer for 4-5 mins the cool under water

back in and repeat the rings will pop loose in a few tries
 
That's awesome! Got a sick KZ750 that's got all the compression of a lunch sack, and showing signs of needing rings and gaskets.

Thanks Guys!
 
Back
Top Bottom