pacomotorstuff
Coast to Coast
We now manufacture Oil Containment Belly Pans for UJM 4 cylinder bikes.
Fitment so far has been GS550 thru GS1000 Suzukis (photo attached) and another customer, who is currently fitting one to a Honda Hurricane vintage race bike, was kind enough to send a few shots as he was starting the fit up. Probably needs a little trimming to pull it back and up a bit, but the fit right out of the box is better, with more ground clearance, than the previous pan he was using. We'll be trying it on a CB750 SOHC shortly and I'll let you know how it fits.
We spent a lot of time to develop a pan that would fit as many bikes as possible and retain ground clearance, but obviously, each bike is a little different and some trimming will be required. So far, the fitments have been bikes with 4 into 1 pipes and I don't know how it would fit with a 4 into 2 or a 4 into 4 exhaust system.
Meets VRRA and AHMRA oil containment requirements.
Dimensions are: length 26", width at top front is 13/3/4" and it is 6-3/4" wide at the back, where the dam is.
I liked the look of the pan on the GS race bike so much, I'm going to put one on my GS550 street bike.
Price is $160.00 Canadian plus Harmonized Sales Tax if applicable plus shipping and handling if you need it.
We're located in Georgetown, about 45 km northwest of Toronto center.
For more info, please call or email.
Thanks for looking.
Pat
905-873-3171,
pacomotorstuff@cogeco.ca
Fitment so far has been GS550 thru GS1000 Suzukis (photo attached) and another customer, who is currently fitting one to a Honda Hurricane vintage race bike, was kind enough to send a few shots as he was starting the fit up. Probably needs a little trimming to pull it back and up a bit, but the fit right out of the box is better, with more ground clearance, than the previous pan he was using. We'll be trying it on a CB750 SOHC shortly and I'll let you know how it fits.
We spent a lot of time to develop a pan that would fit as many bikes as possible and retain ground clearance, but obviously, each bike is a little different and some trimming will be required. So far, the fitments have been bikes with 4 into 1 pipes and I don't know how it would fit with a 4 into 2 or a 4 into 4 exhaust system.
Meets VRRA and AHMRA oil containment requirements.
Dimensions are: length 26", width at top front is 13/3/4" and it is 6-3/4" wide at the back, where the dam is.
I liked the look of the pan on the GS race bike so much, I'm going to put one on my GS550 street bike.
Price is $160.00 Canadian plus Harmonized Sales Tax if applicable plus shipping and handling if you need it.
We're located in Georgetown, about 45 km northwest of Toronto center.
For more info, please call or email.
Thanks for looking.
Pat
905-873-3171,
pacomotorstuff@cogeco.ca