I hate to do this guys but I need room for my other bikes and just don't have the time to complete this project. All it really needs is some final assembly, paint tank, exhaust, throttle cables, tires etc.. It was running when I bought it and before I tore it down. It has 55xx on it so it is low mileage. It has a title as well. I'd like to sell it complete but would consider parting it out if need be. I am located in South Jersey and could meet the buyer pretty much anywhere. Here is a breakdown of what was done:
- frame was detabbed/stitch welded unfinished seams and than powder coated granny smith green
- forks have been rebuilt/lowers painted in black epoxy/triple tree and steering stem have been painted as well. Tapered steering bearings are installed as well.
- wheels were scrubbed and sprayed with black epoxy paint
- front caliper rebuilt and painted gold
- master cylinder was rebuilt
- stainless front brake lines
- drilled/refaced front rotor
- bronze swingarm bushings
- refinished speedometer
- engine was scrubbed/painted gloss black/starter removed and plugged
- stainless socket bolts throughout the motor
- cleaned/rebuilt carbs
Included in the sale are a host of new parts which haven't been installed (clutch cable/speedo cable/fuel line/fuel filters etc.)
No wiring harness is included as it was super ratty and was going to make one from scratch and keep it minimal. Below is a picture of how it sits as of now. I don't know what to ask so make some offers and we can go from there. I really just need it gone and need the cash. Feel free to email me or call/text my cell at 609-417-1097 if you have any questions. Thank you
- frame was detabbed/stitch welded unfinished seams and than powder coated granny smith green
- forks have been rebuilt/lowers painted in black epoxy/triple tree and steering stem have been painted as well. Tapered steering bearings are installed as well.
- wheels were scrubbed and sprayed with black epoxy paint
- front caliper rebuilt and painted gold
- master cylinder was rebuilt
- stainless front brake lines
- drilled/refaced front rotor
- bronze swingarm bushings
- refinished speedometer
- engine was scrubbed/painted gloss black/starter removed and plugged
- stainless socket bolts throughout the motor
- cleaned/rebuilt carbs
Included in the sale are a host of new parts which haven't been installed (clutch cable/speedo cable/fuel line/fuel filters etc.)
No wiring harness is included as it was super ratty and was going to make one from scratch and keep it minimal. Below is a picture of how it sits as of now. I don't know what to ask so make some offers and we can go from there. I really just need it gone and need the cash. Feel free to email me or call/text my cell at 609-417-1097 if you have any questions. Thank you
